Where can I can the engine grill fasteners for my 914?
Sent from my 22011119UY using Tapatalk
Engine Grill Fasteners?
Moderators: drummerboytom, MdR
-
- Nurse, I think I need some assistance
- Posts: 7772
- Joined: Mon Apr 16, 2012 4:31 pm
Engine Grill Fasteners?
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
-
- Nurse, I think I need some assistance
- Posts: 16872
- Joined: Wed Nov 12, 2003 10:48 pm
- Location: Worcs/W Mids border
Re: Engine Grill Fasteners?
.
Probably available from numerous places but Roger Bray has them:
Part no. 999.507.220.40 - also used on 911/912 models for the bumper end caps ...
https://www.rogerbrayrestoration.com/?s ... lter%3AAll
.
Probably available from numerous places but Roger Bray has them:
Part no. 999.507.220.40 - also used on 911/912 models for the bumper end caps ...
https://www.rogerbrayrestoration.com/?s ... lter%3AAll
.
Andy
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
-
- Nurse, I think I need some assistance
- Posts: 7772
- Joined: Mon Apr 16, 2012 4:31 pm
Re: Engine Grill Fasteners?
I think that is the cap and I need the push nut. Seems they are available from a few sources. I wonder what diameter?
Someone else used these
Sent from my 22011119UY using Tapatalk
Someone else used these
Sent from my 22011119UY using Tapatalk
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
-
- Nurse, I think I need some assistance
- Posts: 16872
- Joined: Wed Nov 12, 2003 10:48 pm
- Location: Worcs/W Mids border
Re: Engine Grill Fasteners?
.
I think you'll find a previous owner has used those instead of the original fasteners.
The ones in your picture are called spire nuts/clips - easily found on ebay (or in many hardware stores - if they still exist !) ...
.
I think you'll find a previous owner has used those instead of the original fasteners.
The ones in your picture are called spire nuts/clips - easily found on ebay (or in many hardware stores - if they still exist !) ...
.
Andy
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
-
- Put a fork in me, I'm done!
- Posts: 1647
- Joined: Fri Mar 01, 2013 11:45 am
- Location: Kernow - good old Cornwall
-
- Nurse, I think I need some assistance
- Posts: 7772
- Joined: Mon Apr 16, 2012 4:31 pm
Re: Engine Grill Fasteners?
Thank you everyone for your help. I got the grill back on and I bought a better seal from ebay. Then I got a local body shop to realign the engine lid. They had to reweld the left hinge.
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP