Hi,
Seeking parts for reclining seat mechanism for Porsche 912 - as per attached photos.
(broken gear, no move). Seat type is without headrest.
Any advice or guidance where to locate will be appreciated,
Best Regards
Christos
912 Seat Mechanism - seeking parts reclining mechanism
-
- DDK Seasoned Poster
- Posts: 21
- Joined: Tue Nov 19, 2019 5:21 am
- Location: Athens Greece
Re: 912 Seat Mechanism - seeking parts reclining mechanism
What year is your car?
They look like 1969/70 recliners with the seat fold tab on them?
You cannot buy spare parts for them as far as I know
They look like 1969/70 recliners with the seat fold tab on them?
You cannot buy spare parts for them as far as I know
1966 912
1969 912/6 hotish rod in build
1974 914 Dead
LI 125 Lambretta (Yeah right it’s a 125)
Mini Cooper s
1969 912/6 hotish rod in build
1974 914 Dead
LI 125 Lambretta (Yeah right it’s a 125)
Mini Cooper s
-
- DDK Seasoned Poster
- Posts: 21
- Joined: Tue Nov 19, 2019 5:21 am
- Location: Athens Greece
Re: 912 Seat Mechanism - seeking parts reclining mechanism
Hello Sean,
It’s a friend’s car, it’s a 911E - 1969 but the seats are supposed to be ex. 912 car as the owner claims.
It’s a friend’s car, it’s a 911E - 1969 but the seats are supposed to be ex. 912 car as the owner claims.
Re: 912 Seat Mechanism - seeking parts reclining mechanism
The bracket assemblies shown in your pics certainly crop up on Ebay, at a price of course like everything for our cars, and often with the spline bolt still attached.
I needed a spline bolt, and had to buy the whole assembly to obtain one.
If it is the spline bolt that you need, note that there are at least two different spline bolt lengths (roughly 60mm and 45mm). The long one can be cut down to match a short one. If the teeth have gone behind the chrome bracket, then obviously you need a matching chrome bracket....
I needed a spline bolt, and had to buy the whole assembly to obtain one.
If it is the spline bolt that you need, note that there are at least two different spline bolt lengths (roughly 60mm and 45mm). The long one can be cut down to match a short one. If the teeth have gone behind the chrome bracket, then obviously you need a matching chrome bracket....
Dean
1973T Targa MFI 334 met blu- under restoration https://www.ddk-online.com/phpBB2/viewt ... 28&t=67060
1980 924 Turbo, blu/grn tartan - restored
1973T Targa MFI 334 met blu- under restoration https://www.ddk-online.com/phpBB2/viewt ... 28&t=67060
1980 924 Turbo, blu/grn tartan - restored