brake caliper parts

For all you Porsche 914 fanatics!

Moderators: drummerboytom, MdR

Post Reply
Dean.s
DDK slapper chatter
Posts: 369
Joined: Fri Apr 08, 2016 8:17 pm

brake caliper parts

Post by Dean.s »

after the recent binding rear brake i've refreshed the caliper and refitted it today.

However the spring clips that sit on top of the pads and held in place by the pins through the pads has seemingly become weak and is no longer pushing the pads apart.

I've found a full set on design 911 at £38.

Anybody know where else i may get them?

Also i assume that the adjuster that sticks out of the caliper should be sealed by friction? for the first time today i had a leak through there.
1974 Porsche 914
Dean.s
DDK slapper chatter
Posts: 369
Joined: Fri Apr 08, 2016 8:17 pm

Re: brake caliper parts

Post by Dean.s »

I found just the plates themselves. The part number below are for a 2.0 1974. as usual some parts are the same but some differ. if your car is different please check to confirm. These are available from porsche themselves. i bought 2 front and 2 rear for £28.


front clips 90135191616
rear clips 311615269
1974 Porsche 914
Post Reply