RHD rear wiper set up
Posted: Mon Apr 24, 2023 7:31 am
I have a rear wiper set up for a RHD car that I know works for LWB not sure if applicable to SWB
It is 98% see pic
2 long rods (motor to LHS pivot and pivot to pivot)
2 pivots
Chrome cap for LHS pivot and sleeve for RHS pivot.
All correct nuts.
Wiper arm (needs painting)
Wiper blade (probably stuffed)
3 motors and motor support brackets (not tested but sure can do so before confirming a sale)
The only part I don't have is #21 in the pic, a small white plastic sleeve that sits on the top of the pivot outside of the lid prior to installation of the wiper arm
No wiring either but Kroon sells the loom.
clydeboyer911@gmail.com
895 UK pounds plus shipping from down under
It is 98% see pic
2 long rods (motor to LHS pivot and pivot to pivot)
2 pivots
Chrome cap for LHS pivot and sleeve for RHS pivot.
All correct nuts.
Wiper arm (needs painting)
Wiper blade (probably stuffed)
3 motors and motor support brackets (not tested but sure can do so before confirming a sale)
The only part I don't have is #21 in the pic, a small white plastic sleeve that sits on the top of the pivot outside of the lid prior to installation of the wiper arm
No wiring either but Kroon sells the loom.
clydeboyer911@gmail.com
895 UK pounds plus shipping from down under