DDK - Die Deutschen Klassiker

https://clbrakepads.co.uk/products/cl-b ... aking-pads#

Sent from my M2004J19C using Tapatalk

Give them a ring, they are very good to talk with, and you can then get exactly what you need?

I called. He didn't know and wanted to see an example pad

Sent from my M2004J19C using Tapatalk

I see two different measurements from different sources

55.5*53.5
55.8*51.9

One quoted the width as 14.8

Sent from my M2004J19C using Tapatalk

Now someone from FB is saying D31. Which equals 62*56mm

Sent from my M2004J19C using Tapatalk

Here is a set of new Mintex pads for a 914 off the shelf of my old local VW/Porsche dealer in Farnham. I also have a set mad by Textar from the same source. They measure 55.7mm wide x 53.2mm tall (to top of 'ears') x 14.7mm thick. Some 914 pads have round holes, some have square - you can use either, but may need to drill out the holes on the square ones for the pin to fit (as I did on my CL RC6 race pads).



PS – you're welcome to either set if you want them.

Thank you but I'm keen to try some CL 5s to see if my braking improves

Sent from my M2004J19C using Tapatalk

I finally had a go at fitting my brake pads and the ones I ordered are too small

Sent from my 22011119UY using Tapatalk

Should be 61.80*49.10 with 53 eye to eye.

Sent from my 22011119UY using Tapatalk

I just reread Keith information about the top of the eyes. I didn't measure mine there so maybe I just need to drill my holes a bit wider?

Sent from my 22011119UY using Tapatalk