Page 1 of 1
Engine Carrier
Posted: Sun Nov 13, 2022 6:58 pm
by Rupsol
looking for the bottom engine carrier that covers the fan pulley. Can someone also advise whether the 2 studs at the bottom which come out of the crankcase are just that.....studs? How long are they and are they simply there to mount the carrier plate? Mine have been welded to the carrier so I will have to grind them off. thanks in advance
Re: Engine Carrier
Posted: Sun Nov 13, 2022 7:26 pm
by AndrewSlater
I'm pretty sure they are normally two M10 x 40mm studs to secure the bottom of the carrier plate.
If you look on the engine case drawings on the PET guide they are shown there.
Regards
Andrew
Re: Engine Carrier
Posted: Sun Nov 13, 2022 7:31 pm
by Rupsol
thats helpfull Andrew thanks - are they there just to mount the carrier?
Re: Engine Carrier
Posted: Sun Nov 13, 2022 8:00 pm
by AndrewSlater
Yes I believe so, I don't think anything else attaches there - although its a few years now since I fit mine.
Re: Engine Carrier
Posted: Sun Nov 13, 2022 9:33 pm
by Rupsol
I hope so lol otherwise could get expensive