Engine Carrier

For classic Porsche 911 content

Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin

Post Reply
Rupsol
DDK addict
Posts: 141
Joined: Tue Jul 20, 2010 6:11 pm

Engine Carrier

Post by Rupsol »

looking for the bottom engine carrier that covers the fan pulley. Can someone also advise whether the 2 studs at the bottom which come out of the crankcase are just that.....studs? How long are they and are they simply there to mount the carrier plate? Mine have been welded to the carrier so I will have to grind them off. thanks in advance
Attachments
911_1973_1_09_109-00.jpg
User avatar
AndrewSlater
I luv DDK!
Posts: 968
Joined: Wed Nov 30, 2011 3:35 pm

Re: Engine Carrier

Post by AndrewSlater »

I'm pretty sure they are normally two M10 x 40mm studs to secure the bottom of the carrier plate.
If you look on the engine case drawings on the PET guide they are shown there.

Regards
Andrew
1966 Porsche 912 Slate Grey, red interior - first owner owned for 41 years
1974 Porsche 911 2.7 (The Manhattan project) viewtopic.php?f=28&t=51455
1973 VW 914 1.7 Olympic Blue - ( gone to a good home )
Rupsol
DDK addict
Posts: 141
Joined: Tue Jul 20, 2010 6:11 pm

Re: Engine Carrier

Post by Rupsol »

thats helpfull Andrew thanks - are they there just to mount the carrier?
User avatar
AndrewSlater
I luv DDK!
Posts: 968
Joined: Wed Nov 30, 2011 3:35 pm

Re: Engine Carrier

Post by AndrewSlater »

Yes I believe so, I don't think anything else attaches there - although its a few years now since I fit mine.
1966 Porsche 912 Slate Grey, red interior - first owner owned for 41 years
1974 Porsche 911 2.7 (The Manhattan project) viewtopic.php?f=28&t=51455
1973 VW 914 1.7 Olympic Blue - ( gone to a good home )
Rupsol
DDK addict
Posts: 141
Joined: Tue Jul 20, 2010 6:11 pm

Re: Engine Carrier

Post by Rupsol »

I hope so lol otherwise could get expensive
Post Reply