915 ZF plate diff required
Posted: Thu Nov 10, 2022 10:49 am
Can anyone help re a limited slip diff for a '74 car? Thanks. Peter
HI Peter
I take it you are looking for the ZF to fit in the 915 box for the car you have, I would remove the drive flange from you car and check the splines, if you have corse splings you will need to find some LSD flanges first, 4 bolt 2 dowel and then look for a LSD as the shafts are few and far between,
you could fit the later fine spline diff from a later SC car, depending on the CWP you have, some work will be needed to fit the lated diff if you have a 7:31 CWP and if you have a 8:31 CWP the early diff will not fit
I do have a customer that may have a early ZF diff that he may part with, give me a ring if interested
regards mike