915 ZF plate diff required

After a set of 11's? Post your wanted adverts here.

Moderator: Miggs

Post Reply
LOTTEX
DDK Newbie
Posts: 18
Joined: Mon Nov 15, 2010 11:11 pm
Location: LONDON

915 ZF plate diff required

Post by LOTTEX »

Can anyone help re a limited slip diff for a '74 car? Thanks. Peter
MBEngineering
I luv DDK!
Posts: 779
Joined: Fri Mar 31, 2006 10:54 am
Location: Kendal CUMBRIA
Contact:

Re: 915 ZF plate diff required

Post by MBEngineering »

HI Peter
I take it you are looking for the ZF to fit in the 915 box for the car you have, I would remove the drive flange from you car and check the splines, if you have corse splings you will need to find some LSD flanges first, 4 bolt 2 dowel and then look for a LSD as the shafts are few and far between,

you could fit the later fine spline diff from a later SC car, depending on the CWP you have, some work will be needed to fit the lated diff if you have a 7:31 CWP and if you have a 8:31 CWP the early diff will not fit

I do have a customer that may have a early ZF diff that he may part with, give me a ring if interested

regards mike
Post Reply