Page 1 of 1

norma clamps

Posted: Wed Sep 21, 2022 11:45 pm
by Jonnydaz53
hi guys anyone got any norma clamps they are not using

thanks

Re: norma clamps

Posted: Thu Sep 22, 2022 7:14 am
by stretch
Hi Jonny, you can get all the small one's for fuel hoses etc from the Wurth shop.

Re: norma clamps

Posted: Thu Sep 22, 2022 9:24 am
by deano
I think Norma is the brand, and they do all shapes and sizes of clamps e.g. https://www.hoses.co.uk/clamps-clips/no ... and-clamps

Perhaps they are famous for one particular type? would love to know if so :cyclopsani:

Re: norma clamps

Posted: Thu Sep 22, 2022 10:35 am
by inaglasshouse
Depends how picky you are about originality. Most of the current Norma clamps use different clamp mechanisms (spiral "jubilee" style vs clamping bolt) or fasteners (hex bolt to clamp vs cheese head screw) than back in the day. So they say Norma on them, and do the job, but for full anorak points old ones are better.

Personally for the small ones I bought modern Norma (stainless, so an improvement of sorts), replaced the bolts with cheese heads, and had them zinc plated - they look pretty close.
For the large ones I found that NOS was the best way.
Your mileage may vary!

Re: norma clamps

Posted: Thu Sep 22, 2022 4:49 pm
by 210bhp
I have a few original Norma clamps of each (not every) size if interested.
The originals in some sizes are pretty difficult to find.

Regards
Mike

Re: norma clamps

Posted: Thu Sep 22, 2022 8:42 pm
by matteo68
Could I have some please Mike? Not sure what sizes I need for my fuel lines though?!!

Image
Image

Re: norma clamps

Posted: Thu Sep 22, 2022 9:05 pm
by 210bhp
The size is usually marked on them Matt. Let me know what you find and how many.

Regards
Mike

Re: norma clamps

Posted: Thu Sep 22, 2022 11:56 pm
by Jonnydaz53
hi mike im looking for the 22-25mm size also the large engine hoses that run to the heat exchangers

thanks

Re: norma clamps

Posted: Fri Sep 23, 2022 5:34 pm
by 210bhp
Hi Jonny

Theses are the ones I have. To be sure on the larger ones I think a size would be an advantage as I have several different ‘large’ clamps.

Image

Image

Regards
Mike