Performance Camshafts from Dougherty Racing: DC62 profile. A 'RSR-type' (fairly hot) grind, somewhere between GE60-GE80.
Measured as:
316 deg inlet / 315 deg exhaust duration at 0.1mm valve lift
280 deg inlet / 264 deg exhaust duration at 1mm valve lift
8.34mm inlet / 8.25mm exhaust cam lift
12.42mm inlet / 12.28 exhaust valve lift
LH cam is setup for MFI pump drive
Early 'large nut' type pulley end retention
49mm 4-bearing type cams for 49mm cam housings.
DDk price £900+P&P for the pair.
Sent from my SM-A528B using Tapatalk
911 MFI Performance Camshafts: Dougherty Racing DC62: SOLD
- MikeyC
- Married to the DDK
- Posts: 275
- Joined: Thu Mar 24, 2016 10:08 am
- Location: Oxfordshire, UK
- Contact:
911 MFI Performance Camshafts: Dougherty Racing DC62: SOLD
Last edited by MikeyC on Thu Jun 01, 2023 9:58 am, edited 1 time in total.
Mike Champion
www.mceporsche.com
www.mceporsche.com
- MikeyC
- Married to the DDK
- Posts: 275
- Joined: Thu Mar 24, 2016 10:08 am
- Location: Oxfordshire, UK
- Contact:
Re: 911 MFI Performance Camshafts: Dougherty Racing DC62: SOLD
Hi, these are now sold. Many thanks.
Mike Champion
www.mceporsche.com
www.mceporsche.com