Anybody recommend a stone chip coating for the underbody?
I guess I want something in the original grey, overpaintable,and applyable with a schutz gun.
Also, the floor has been well-primed with several coats, but I'm of a mind to cover it in a completely non-porous paint before applying the stone chip - so as to prevent moisture spreading underneath. Any suggestions what best to do in that regard?
What stone chip?
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
- Put a fork in me, I'm done!
- Posts: 1970
- Joined: Thu Jul 08, 2021 8:18 am
- Location: Lichfield
What stone chip?
1970 911T, Signal orange (Restoration thread)
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
Re: What stone chip?
A 2K epoxy primer underneath would be a good start. Water impermeable unlike standard primer.
I used Gravitex to redo my fuel tank in the rubberised finish. Sprayed with a Schutz gun. Not sure how well it matches the OEM finish underneath.
Others speak.well.of 3M
I used Gravitex to redo my fuel tank in the rubberised finish. Sprayed with a Schutz gun. Not sure how well it matches the OEM finish underneath.
Others speak.well.of 3M
-
- Nurse, I think I need some assistance
- Posts: 10244
- Joined: Wed Mar 31, 2004 1:27 pm
- Location: Cheshire
- Contact:
Re: What stone chip?
I did 2K epoxy mastic then Raptor underbody coating from a Shutz gun.
The raptor is available in different colours and can be overpainted (as it was on my sills) but I just did black as it’s under the car.
The raptor is available in different colours and can be overpainted (as it was on my sills) but I just did black as it’s under the car.