Help cable needed
Posted: Sun Jun 12, 2022 11:35 am
I went to investigate my problems this morning and the engine lid cable snapped!
Looks like a m5 rod end with about a 1.5mm diameter cable.
I can find a replacement online but they must be available
Unfortunately there is no length on the other side to solder and refit
Sent from my M2004J19C using Tapatalk
Looks like a m5 rod end with about a 1.5mm diameter cable.
I can find a replacement online but they must be available
Unfortunately there is no length on the other side to solder and refit
Sent from my M2004J19C using Tapatalk