Gauge seal for clock
Moderator: Miggs
Gauge seal for clock
Anyone got a decent grippy gauge to dash seal for the clock ? I'm fitting a new phone mount but the extra weight means the old seal doesn want to do its job of holding the clock securely in place
James
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1973 MGB Roadster
Its not how fast you go, but how you go fast
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1973 MGB Roadster
Its not how fast you go, but how you go fast
Re: Gauge seal for clock
Pretty sure I've got a spare seal but hard to tell in advance how grippy it will be...
Have you tried a length of electrical tape around some part of the clock body to effectively make it a bit bigger in diameter so that the seal is a better interference fit?
Have you tried a length of electrical tape around some part of the clock body to effectively make it a bit bigger in diameter so that the seal is a better interference fit?
sunflower yellow 1973 914/6 conversion
Re: Gauge seal for clock
thanks ... but I bit the bullet and ordered a new one .
James
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1973 MGB Roadster
Its not how fast you go, but how you go fast
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1973 MGB Roadster
Its not how fast you go, but how you go fast
- MikeB
- Put a fork in me, I'm done!
- Posts: 1913
- Joined: Thu Aug 07, 2008 11:13 pm
- Location: N. Ireland
Re: Gauge seal for clock
How about a bit of tape round clock to expand the rubber seal?
Cheers
Mike
RS Rep 3.0 on Webers
Mike
RS Rep 3.0 on Webers