As the title, I am looking for a weber/zenith carburettor linkage rod, either new or used
There are a few on eBay but all in the states and I am dubious about buying from there.
Webcon are having the whole weber kit manufactured but that won't be for a few months
Grateful if someone can help or point me in the direction of a supplier
Weber linkage
Moderator: Miggs
Re: Weber linkage
Hi
I have used www.carbparts.eu and always got good service, I don't know if they have the parts you need.
Barry
I have used www.carbparts.eu and always got good service, I don't know if they have the parts you need.
Barry
2007 Cayman
2008 Mini R56 JCW
1962 356BT6 Cabriolet
1964 356C Coupé
1960 MGA 1600
1950 MG TD
2007 Harley Davidson Sportster
Member# 661
2008 Mini R56 JCW
1962 356BT6 Cabriolet
1964 356C Coupé
1960 MGA 1600
1950 MG TD
2007 Harley Davidson Sportster
Member# 661
-
- DDK forever
- Posts: 538
- Joined: Sun Feb 29, 2004 10:10 am
Re: Weber linkage
Thanks, will check them out
-
- DDK slapper chatter
- Posts: 404
- Joined: Sat May 23, 2009 7:30 pm
Re: Weber linkage
I might have a few bits. Can you post photos of the linkage rod(s) you need? Then I will know what I am looking for...
-
- DDK forever
- Posts: 538
- Joined: Sun Feb 29, 2004 10:10 am
Re: Weber linkage
All I have is a PET schematic of the parts but am unable to post here. If you PM me your email address I can send you a copy of the pagemarleybones wrote:I might have a few bits. Can you post photos of the linkage rod(s) you need? Then I will know what I am looking for...
Thanks
Re: Weber linkage
Hi there Marleybones
I noticed you had posted to somebody that you may have some throttle rods ?
I'm sure i have 2 rods missing from my Solex set up
I'm sure one looks like attached pic - if you have one?
Thanks
Jeff
I noticed you had posted to somebody that you may have some throttle rods ?
I'm sure i have 2 rods missing from my Solex set up
I'm sure one looks like attached pic - if you have one?
Thanks
Jeff