Hi All.
My VR has given up the ghost and I am wondering if anyone here is using a Solid State version.
My alternator is a SEV Marshal in a 76 911, I believe either 70 or 75 amp unit.
If anyone is using a a newer VR what is the part and where did you buy from.
Thanks in advance
Mike
Voltage Regulator
Moderators: hot66, impmad2000, Nige
-
AndrewSlater
- I luv DDK!
- Posts: 969
- Joined: Wed Nov 30, 2011 3:35 pm
Re: Voltage Regulator
Hi Mike,
on my '74 with the SEV Marshall alternator I fitted a HUCO 13 0427. At the time they were readily available on eBay etc - cost around £20.
Page 14 of my restoration thread for the Manhattan project.
Hope that's helpful
Andrew
on my '74 with the SEV Marshall alternator I fitted a HUCO 13 0427. At the time they were readily available on eBay etc - cost around £20.
Page 14 of my restoration thread for the Manhattan project.
Hope that's helpful
Andrew
1966 Porsche 912 Slate Grey, red interior - first owner owned for 41 years
1974 Porsche 911 2.7 (The Manhattan project) viewtopic.php?f=28&t=51455
1973 VW 914 1.7 Olympic Blue - ( gone to a good home )
1974 Porsche 911 2.7 (The Manhattan project) viewtopic.php?f=28&t=51455
1973 VW 914 1.7 Olympic Blue - ( gone to a good home )
Re: Voltage Regulator
Hi Andrew
Thanks will take a look
Mike
Thanks will take a look
Mike
-
Jonny Hart
- Put a fork in me, I'm done!
- Posts: 1544
- Joined: Mon Feb 01, 2010 2:28 pm
Re: Voltage Regulator
Or just use a unit with an internal VR. We reproduce the Porsche Service
Bulletin for this upgrade at the end of our high output alternator install manual which you can download from this page:
https://www.classicretrofit.com/pages/m ... d-software
Bulletin for this upgrade at the end of our high output alternator install manual which you can download from this page:
https://www.classicretrofit.com/pages/m ... d-software