Leftover from my SC resto project
Posted: Wed Sep 29, 2021 2:24 pm
911 bits for sale
No idea what most of this is worth, although some parts I can find on ebay are clearly stupid money. Some might be tat, in which case please let me know and I'll bin them, although one person's tat is another's 'missing piece and they might be better than what you've got. I also replaced a load of stuff I didn't need to, like brake discs and shox.
I got bored having photographed and entered all the info, so just made up prices as I went along, so maybe back to amend if/when any enthusiasm returns
All prices exclude postage and collection or pickup can be arranged. I am trying to book a holiday at the end of next week, so might be a short delay in posting around then.
I’ve tried to group them into body, electrical, engine & gearbox, and finally suspension and brakes.
Wheels & tyres - £250 - sold subject to payment
Wheels only have ‘16’ markings, so I am assuming they are pattern parts. Look like 7&8s, but hard to measure with tyres on. Tyres are old, hard and are only suitable for garage use
Engine oil pipes - £80
Whale tail type spoiler (poor) - £25
N/s/f wing - rust repaired & in epoxy - need filling and painting - £80
Exhaust - £35
Bonnet – £25 sold, subject to payment & collection
Lots of filler, which I got bored of removing, then used the bonnet as a spray gun check panel. Not sure why there is so much filler, it doesn’t look too bad from the underside.
Rear bumper, currently Grand Prix White – delaminated at bottom edge – donation to MacMillan
Rear valance – epoxy primered - £75
Front bumper rubber mount (plastic) - £10
Front bumper rubber - £20
Rear bumper over-riders (poorly bolts) - £20
Rear bellows (1 of 4 bolt straps missing) - £20
Front bellows (2 broken bolts) - £20
Steering shaft cover - £30 - SOLD
Momo boss - early 911 ? - SOLD
Carpet set - brown
Rear lid/bumper seal – £10 (have 2)
Engine seal (short) – 2 available - £10ea - 1 remaining
Engine seal (long) rough – donation to MacMillan - Sold
Cill cover rubbers (pr) - £30
Rear bumper rubbers (pr) - £20
Front bumperettes – donation to MacMillan
Targa hoop seal - sold
Targa screen seal (pattern part) – fitted onto screen but never into car - sold
Front screen seal – apparently faulty, so for trial fitting – donation to MacMillan
Froot & engine lid bump stops - £10
Fuel vapour tank - £10
Door handle - NS interior - £40
Pair in cabin air outlets (printed by Phil) Suitable for cold air only - £20
Pair diverter bases- 1 mounting broken, so I used flat washer above it - £20
Various in cabin air outlet parts - £20
Various original pipes from blower to vents - £20
Pair Boxster seat runners - £40
Pair door latches with shims - SOLD
Blower cover - £25 - sold
Rear valance gasket - £10
Clips to secure plastic support for front bumper rubber - £10
3 clips and 2 spacers
Clips for rear reflector - £10
Bonnet emblem gasket – donation to MacMillan
Door mirror gaskets (pr) – donation to MacMillan
Door mirror gasket – donation to MacMillan
CD radio – donation to MacMillan
Slam panel plastic - £20
Various front indicator lamp parts - £20
Pair headlights - £300
I Bosch glass lens & 1 other
Pair RHD headlight reflectors - £25
Rear light unit - plate separating lights – donation to MacMillan
[
Heater blower assembly - £50 - SOLD
Autoheat control box (missing side doors) - £250
Front 8 way fuse panel & 2 off 3 way fuse panel (used in front & rear) - £5ea
Front 10 way fuse panel (1 fuse post damaged) - £5
Alternator and regulator - £45
Cassette stack - £25
Headlight switch £150
Hazard switch (one tab broken) - £50
HRW switch £75
SC cams - £300
Some pitting to a couple of lobes but useful for regrinding to suit your preferred profile
6 pistons n& cylinders- £250
Set 6 Alusil P&Cs, with gudgeon pins. Pistons not removed from cylinders
2 cylinders have marking on the outer ring, where exhaust gases were leaking (due to head studs missing !)
Oil pipe brackets (2 new + 2 old p-clips) - £15
Intake joiners - SOLD
Tappet adjusters - SOLD
Cam chain tensioners - £50
Cam tensioner oil feed pipes - £25
Lower rocker covers (pr) - £50
Cam chain box covers (pr) - £50
Oil flow restrictors (pr) - £20
PRV parts (side with gallery plugs) - £15
PRV parts (side without gallery plugs) - £15
964/993 oil cooler c/w fan & shroud - £375
Bought to add to my SC, but I’m now moving in a different direction
Pre-‘74 heat exchangers – £275
Have been repaired and recently painted with VHT
915 gearshift coupling - £50
Gearshift coupling -bushes – Superpro SPF0893K - SOLD
Oil cooler mount – unused - Sold
Oil cooler top mount - sold
Oil sump pan (no drain) - £35
Exhaust hanger - £20
Rear engine tinware – donation to MacMillan
Use as a template ?
Clutch fork - £20
Omega spring - £10
Engine & gearbox mounts - £15
Fuel pump banjo - £5
Fuel tank filter - £15
Support for engine mounted blower fan - £20
Supports for pipe from H/ex to engine blower - £10
Engine bay fan outlet (plastic) - £20
Bilstein strut inserts – price per pair, 2 pair available - £40 pr
Bilstein rear shocks – price per pair, 2 pair available - £40 pr
Stripped & epoxy primered
Swaybar bushes – Superpro SPF0095-18K – unused - £10
Strut top mount rubbers - £10
Track rod assemblies (pr) – TR ends look quite recent - £30
Front discs (pr) - £30
Rear discs (pr) - £30
Clips for brake pipes – donation to MacMillan
Set (4) handbrake shoes, plus 1 new - £20
CV joints (4) – worn but can be reversed for second life (found that out too late) - £20
CV boots (4) - SOLD
No idea what most of this is worth, although some parts I can find on ebay are clearly stupid money. Some might be tat, in which case please let me know and I'll bin them, although one person's tat is another's 'missing piece and they might be better than what you've got. I also replaced a load of stuff I didn't need to, like brake discs and shox.
I got bored having photographed and entered all the info, so just made up prices as I went along, so maybe back to amend if/when any enthusiasm returns
All prices exclude postage and collection or pickup can be arranged. I am trying to book a holiday at the end of next week, so might be a short delay in posting around then.I’ve tried to group them into body, electrical, engine & gearbox, and finally suspension and brakes.
Wheels & tyres - £250 - sold subject to payment
Wheels only have ‘16’ markings, so I am assuming they are pattern parts. Look like 7&8s, but hard to measure with tyres on. Tyres are old, hard and are only suitable for garage use
Engine oil pipes - £80
Whale tail type spoiler (poor) - £25
N/s/f wing - rust repaired & in epoxy - need filling and painting - £80
Exhaust - £35
Bonnet – £25 sold, subject to payment & collection
Lots of filler, which I got bored of removing, then used the bonnet as a spray gun check panel. Not sure why there is so much filler, it doesn’t look too bad from the underside.
Rear bumper, currently Grand Prix White – delaminated at bottom edge – donation to MacMillan
Rear valance – epoxy primered - £75
Front bumper rubber mount (plastic) - £10
Front bumper rubber - £20
Rear bumper over-riders (poorly bolts) - £20
Rear bellows (1 of 4 bolt straps missing) - £20
Front bellows (2 broken bolts) - £20
Steering shaft cover - £30 - SOLD
Momo boss - early 911 ? - SOLD
Carpet set - brown
Rear lid/bumper seal – £10 (have 2)
Engine seal (short) – 2 available - £10ea - 1 remaining
Engine seal (long) rough – donation to MacMillan - Sold
Cill cover rubbers (pr) - £30
Rear bumper rubbers (pr) - £20
Front bumperettes – donation to MacMillan
Targa hoop seal - sold
Targa screen seal (pattern part) – fitted onto screen but never into car - sold
Front screen seal – apparently faulty, so for trial fitting – donation to MacMillan
Froot & engine lid bump stops - £10
Fuel vapour tank - £10
Door handle - NS interior - £40
Pair in cabin air outlets (printed by Phil) Suitable for cold air only - £20
Pair diverter bases- 1 mounting broken, so I used flat washer above it - £20
Various in cabin air outlet parts - £20
Various original pipes from blower to vents - £20
Pair Boxster seat runners - £40
Pair door latches with shims - SOLD
Blower cover - £25 - sold
Rear valance gasket - £10
Clips to secure plastic support for front bumper rubber - £10
3 clips and 2 spacers
Clips for rear reflector - £10
Bonnet emblem gasket – donation to MacMillan
Door mirror gaskets (pr) – donation to MacMillan
Door mirror gasket – donation to MacMillan
CD radio – donation to MacMillan
Slam panel plastic - £20
Various front indicator lamp parts - £20
Pair headlights - £300
I Bosch glass lens & 1 other
Pair RHD headlight reflectors - £25
Rear light unit - plate separating lights – donation to MacMillan
[Heater blower assembly - £50 - SOLD
Autoheat control box (missing side doors) - £250
Front 8 way fuse panel & 2 off 3 way fuse panel (used in front & rear) - £5ea
Front 10 way fuse panel (1 fuse post damaged) - £5
Alternator and regulator - £45
Cassette stack - £25
Headlight switch £150
Hazard switch (one tab broken) - £50
HRW switch £75
SC cams - £300
Some pitting to a couple of lobes but useful for regrinding to suit your preferred profile
6 pistons n& cylinders- £250
Set 6 Alusil P&Cs, with gudgeon pins. Pistons not removed from cylinders
2 cylinders have marking on the outer ring, where exhaust gases were leaking (due to head studs missing !)
Oil pipe brackets (2 new + 2 old p-clips) - £15
Intake joiners - SOLD
Tappet adjusters - SOLD
Cam chain tensioners - £50
Cam tensioner oil feed pipes - £25
Lower rocker covers (pr) - £50
Cam chain box covers (pr) - £50
Oil flow restrictors (pr) - £20
PRV parts (side with gallery plugs) - £15
PRV parts (side without gallery plugs) - £15
964/993 oil cooler c/w fan & shroud - £375
Bought to add to my SC, but I’m now moving in a different direction
Pre-‘74 heat exchangers – £275
Have been repaired and recently painted with VHT
915 gearshift coupling - £50
Gearshift coupling -bushes – Superpro SPF0893K - SOLD
Oil cooler mount – unused - Sold
Oil cooler top mount - sold
Oil sump pan (no drain) - £35
Exhaust hanger - £20
Rear engine tinware – donation to MacMillan
Use as a template ?
Clutch fork - £20
Omega spring - £10
Engine & gearbox mounts - £15
Fuel pump banjo - £5
Fuel tank filter - £15
Support for engine mounted blower fan - £20
Supports for pipe from H/ex to engine blower - £10
Engine bay fan outlet (plastic) - £20
Bilstein strut inserts – price per pair, 2 pair available - £40 pr
Bilstein rear shocks – price per pair, 2 pair available - £40 pr
Stripped & epoxy primered
Swaybar bushes – Superpro SPF0095-18K – unused - £10
Strut top mount rubbers - £10
Track rod assemblies (pr) – TR ends look quite recent - £30
Front discs (pr) - £30
Rear discs (pr) - £30
Clips for brake pipes – donation to MacMillan
Set (4) handbrake shoes, plus 1 new - £20
CV joints (4) – worn but can be reversed for second life (found that out too late) - £20
CV boots (4) - SOLD
