Handbrake fix
Posted: Fri Sep 10, 2021 7:17 pm
Just finished nasty little job on my 3.2. The handbrake broke on the way back from Boxengasse. The way it went didn't feel like a cable had gone and sure enough it was the pin through the clevis that had disappeared up my tunnel, ooer. But what a pig to fix, the heater consol had to be released and pulled back, then I located a shouldered M6 bolt which I cut down and re-tapped, I was unable to locate what remained of the old pin. I had to super glue the bolt to an extended allen key then a two fingered job to get it through the clevis and handbrake arm. I got a stainless 10 mil captive nut very carefully onto the bolt and after that it was plain sailing. I would have liked to have found the old part just to see how it was originally located, more than likely a crummy little C clip. Anyroad the old girl got an oil and filter change this week, Porsche classic 10-60 so we're ready to rock that is until I get the Red Line tranmission oil I have ordered to replace the Swepco currently in the 915 box which nobody seems to have a good word for. I doubt I shall notice one iota of difference but hey ho I'm giving it a try.