I bgt a 44mm saw drill to open my heart insulator for my Webers but it will not fit in my chuck? Am I missing a piece? Perhaps this fits directly into the shaft that my chuck fits into? I have to remove the chuck?
Sent from my M2004J19C using Tapatalk
Saw drill that am I missing (
Moderators: hot66, impmad2000, Nige
-
- Nurse, I think I need some assistance
- Posts: 7751
- Joined: Mon Apr 16, 2012 4:31 pm
Saw drill that am I missing (
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
Re: Saw drill that am I missing (
They usually have an “arbor”.
A holder than can have pins to grip the saw (like dowels on a flywheel), and a small conventional drill bit for centring.
A holder than can have pins to grip the saw (like dowels on a flywheel), and a small conventional drill bit for centring.
Re: Saw drill that am I missing (
That looks like a Bosch one? They have a quick release system, your missing the bit that goes in the drill.
https://www.screwfix.com/p/bosch-hex-sh ... -7mm/737hf
https://www.screwfix.com/p/bosch-hex-sh ... -7mm/737hf
1971 911E
1990 986S
1990 986S
-
- Nurse, I think I need some assistance
- Posts: 7751
- Joined: Mon Apr 16, 2012 4:31 pm
Re: Saw drill that am I missing (
I ended up buying one from Screwfix
Sent from my M2004J19C using Tapatalk
Sent from my M2004J19C using Tapatalk
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP