Page 11 of 24

Re: Resto thread for 119100008 69t

Posted: Fri May 27, 2022 9:17 pm
by Gary71
leedurrant73 wrote:Hello Gary, is your car RHD or LHD ?
LHD.

I can only think the vents were something to do with the auxiliary heater in the smugglers box

Resto thread for 119100008 69t

Posted: Fri May 27, 2022 9:43 pm
by leedurrant73
Ok, strange. I have some drill holes in the smugglers box but unsure what they were for?

Two small and one bigger hole

Thanks Lee
Image

Re: Resto thread for 119100008 69t

Posted: Sat May 28, 2022 8:39 am
by JA51ON W
Mines the same, the larger hole has gromet and wires for the electric fuel pump, my cars mfi. Jason.

Re: Resto thread for 119100008 69t

Posted: Sat May 28, 2022 9:18 am
by JA51ON W
.

Re: Resto thread for 119100008 69t

Posted: Sun May 29, 2022 12:16 pm
by leedurrant73
Perfect thanks mate

Re: Resto thread for 119100008 69t

Posted: Mon May 30, 2022 2:28 pm
by IanM
deano wrote:Someone told me just days ago that the RHD's had the louvre holes covered up with a plate, and that plate seems to fit the bill.... I think it might be original. Perhaps someone else might confirm.... :cyclops:
Incredible. Learn something new everyday.
What are the louvres for? Why don't RHD's need them?

Re: Resto thread for 119100008 69t

Posted: Tue May 31, 2022 8:18 am
by 911hillclimber
I think as Gary said earlier, led could have the aux heater fired in the smugglers box and vents needed for the petrol fireded heater.
Rhd cars never had the box, pedals needed the space.
Seems to me a fussy mod to do by the factory but water can ingress through the vents and fill the pedal box assembly.
Happens on my lad converted car which still has the vents open.

Re: Resto thread for 119100008 69t

Posted: Tue May 31, 2022 8:51 am
by Lightweight_911
.

Wonder why the Factory didn't just use seam sealer (or something similar) ...

.

Re: Resto thread for 119100008 69t

Posted: Tue May 31, 2022 9:38 am
by 911hillclimber
Indeed, the spot welds look very tacked on to me, an after thought?

Re: Resto thread for 119100008 69t

Posted: Tue May 31, 2022 10:20 am
by leedurrant73
I keep finding different holes on my car, it’s hard to work out what they were for ?

App all your comments it’s very interesting

Re: Resto thread for 119100008 69t

Posted: Fri Jun 03, 2022 10:29 am
by RobFrost
I'd say this is air con based upon the pipes etc. I believe it's in a 1967 911R. Maybe this uses those holes?

Image

Resto thread for 119100008 69t

Posted: Sat Jul 09, 2022 4:53 pm
by leedurrant73
Hello,

I’m after some advice, I’ve been told a 69t should be black inside the engine compartment and front boot area.

The problem I have is when I’ve scratched the black paint I find the original light ivory colour underneath?

The car is early October build and one of the first batch RHD cars for 69MY.

Could it been prayed body colour?
Image




Sent from my iPhone using Tapatalk

Re: Resto thread for 119100008 69t

Posted: Sat Jul 09, 2022 4:55 pm
by leedurrant73
Image
Here’s another near to front partition panel


Sent from my iPhone using Tapatalk

Resto thread for 119100008 69t

Posted: Sat Jul 09, 2022 5:19 pm
by leedurrant73
Problem solved, it’s original black near to vin number. Under that is green primer.. thanks

Image


Sent from my iPhone using Tapatalk

Re: Resto thread for 119100008 69t

Posted: Sun Jul 10, 2022 8:53 am
by Lightweight_911
.
Lee - the black paint under the bonnet & in the engine compartment was added over the top of the body colour.

I seem to remember it was brush-painted originally & after a few years of 'wear & tear' the body colour started to show through in certain areas ...

.