Page 1 of 1
1972 steering wheel
Posted: Sat May 01, 2021 2:59 pm
by targa/red
just been sorting out a few spares i came across this 380mm original steering wheel in nice condition with the no stamped on it 901 347 001 20 also stamped RB 4 72 is it off a RS what should i put it for sale at DDK will get first dib
Also a 3- terminal CDI unit off my 1972 2.4 911E
Thanks
Re: 1972 steering wheel
Posted: Sat May 01, 2021 3:07 pm
by Gary71
Interested in the wheel, price pending of course!
Re: 1972 steering wheel
Posted: Sat May 01, 2021 4:53 pm
by Lightweight_911
.
I think you'll find that the wheel is 400mm in diameter & that the part no. is actually 901.347.081.20.
It is the optional 'thick grip' leather steering wheel - most were fitted to '72 911S models.
.
Re: 1972 steering wheel
Posted: Sat May 01, 2021 5:36 pm
by targa/red
Thanks Andy i thought you would know was not sure if it was a 0 or 8 thought when i measured it was 380 but will check it again
Re: 1972 steering wheel
Posted: Sat May 01, 2021 6:27 pm
by 210bhp
Could you send details of the cdi please
Regards
Mike
Re: 1972 steering wheel
Posted: Sat May 01, 2021 6:58 pm
by AndrewSlater
I would be interested in the wheel as per my wanted ad - depending upon size and price.
Regards
Andrew
Re: 1972 steering wheel
Posted: Sun May 02, 2021 5:33 pm
by targa/red
have managed to check the size this afternoon after Mike posting
The diamentions are :- Overall size is 400mm but centre to centre is 380mm
Rim is 22mm thick
dish 114mm
if anybody can give me figure to put it up for sale at i would be grateful or give me a offer I can e-mail pictures if you pm
Re: 1972 steering wheel
Posted: Sun May 02, 2021 6:19 pm
by Gary71
Hi, Sounds like a stock wheel rather than the smaller one so as I’ve already got two of those I’m out
Re: 1972 steering wheel
Posted: Wed May 05, 2021 4:28 pm
by targa/red
Mike PM sent