356A Coupe restro
-
- Put a fork in me, I'm done!
- Posts: 1852
- Joined: Thu Dec 25, 2008 2:28 pm
- Location: sunny sussex
Re: 356A Coupe restro
Gregg, remember when we found out your car and my car, were both sold after AFN ordered them to JH Bartlett in 1959 and you advised the AFN ref number of 403, well I noticed today my AFN ref is 405. Both were Supers yours red mine blue. The first owner of mine was a 21 year old daughter of a Baronett who lived near Bristol. She only kept it for about a year, I expect her dad bought it for her so much money then.
Our cars must have a connection from the assembly line right through to JH Bartlett.
Your work is looking very nice.
Roy
Our cars must have a connection from the assembly line right through to JH Bartlett.
Your work is looking very nice.
Roy
RHD 356A coupe super 75 106954
Re: 356A Coupe restro
Roy, wow that is amazing.
After all these years we must get them back together, maybe at Classic at the Castle later in the year?
After all these years we must get them back together, maybe at Classic at the Castle later in the year?
1963 Karmann Ghia
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
Re: 356A Coupe restro
Progress on the 356 is coming along. Plans have had to be flexible to accommodate unforeseen but predictable issues. I am hoping the engine build problems have been largely overcome.
The rest of the panels have been painted and the remaining components prepared for paint and most likely done by know. These have been blocked with 800 grit. The final coat of clear coat should go on early next week and then final flat and polish.
Untitled
Untitled
Untitled
You can see in the picture the front indicator bezels which I believe are a 1 year only design, so very difficult to find chrome replacement. The base metal alloy is not great quality after 60 years so have gone to paint.
Untitled
I also picked up a set of 165VR15 Pirelli Cinturato CN36 from Longstone tyres yesterday on my way home from a job. I previously run the Michelin XZX which due to the lower speed rating are really only suitable for VW bugs. I believe the Fuchs I run are a slightly wider offset so 165 is the largest that can be fitted.
Untitled
The rest of the panels have been painted and the remaining components prepared for paint and most likely done by know. These have been blocked with 800 grit. The final coat of clear coat should go on early next week and then final flat and polish.
Untitled
Untitled
Untitled
You can see in the picture the front indicator bezels which I believe are a 1 year only design, so very difficult to find chrome replacement. The base metal alloy is not great quality after 60 years so have gone to paint.
Untitled
I also picked up a set of 165VR15 Pirelli Cinturato CN36 from Longstone tyres yesterday on my way home from a job. I previously run the Michelin XZX which due to the lower speed rating are really only suitable for VW bugs. I believe the Fuchs I run are a slightly wider offset so 165 is the largest that can be fitted.
Untitled
1963 Karmann Ghia
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
-
- Put a fork in me, I'm done!
- Posts: 1852
- Joined: Thu Dec 25, 2008 2:28 pm
- Location: sunny sussex
Re: 356A Coupe restro
Gregg,
Great work and of course those Bezels are rare! You are correct as well the material they made them from is crap. Mine were bubbly when I bought the car in the 60's and they still are, no rust of course just bubbly. Does annoy me but that is how they will stay.
It would be nice to put the cars together after 64 years apart, but Gregg for me now its too far the car would get there maybe, but although when working I was doing many thousands of miles driving to customers, now Hedingham is a stretch to far for me in a decade beginning with eight.
It is going to look nice Gregg !
Roy
Great work and of course those Bezels are rare! You are correct as well the material they made them from is crap. Mine were bubbly when I bought the car in the 60's and they still are, no rust of course just bubbly. Does annoy me but that is how they will stay.
It would be nice to put the cars together after 64 years apart, but Gregg for me now its too far the car would get there maybe, but although when working I was doing many thousands of miles driving to customers, now Hedingham is a stretch to far for me in a decade beginning with eight.
It is going to look nice Gregg !
Roy
RHD 356A coupe super 75 106954
-
- Put a fork in me, I'm done!
- Posts: 1852
- Joined: Thu Dec 25, 2008 2:28 pm
- Location: sunny sussex
Re: 356A Coupe restro
Gregg,
Great work and of course those Bezels are rare! You are correct as well the material they made them from is crap. Mine were bubbly when I bought the car in the 60's and they still are, no rust of course just bubbly. Does annoy me but that is how they will stay.
It would be nice to put the cars together after 64 years apart, but Gregg for me now its too far the car would get there maybe, but although when working I was doing many thousands of miles driving to customers, now Hedingham is a stretch to far for me in a decade beginning with eight.
It is going to look nice Gregg !
Roy
Great work and of course those Bezels are rare! You are correct as well the material they made them from is crap. Mine were bubbly when I bought the car in the 60's and they still are, no rust of course just bubbly. Does annoy me but that is how they will stay.
It would be nice to put the cars together after 64 years apart, but Gregg for me now its too far the car would get there maybe, but although when working I was doing many thousands of miles driving to customers, now Hedingham is a stretch to far for me in a decade beginning with eight.
It is going to look nice Gregg !
Roy
RHD 356A coupe super 75 106954
-
- Put a fork in me, I'm done!
- Posts: 1852
- Joined: Thu Dec 25, 2008 2:28 pm
- Location: sunny sussex
Re: 356A Coupe restro
Gregg,
Great work and of course those Bezels are rare! You are correct as well the material they made them from is crap. Mine were bubbly when I bought the car in the 60's and they still are, no rust of course just bubbly. Does annoy me but that is how they will stay.
It would be nice to put the cars together after 64 years apart, but Gregg for me now its too far the car would get there maybe, but although when working I was doing many thousands of miles driving to customers, now Hedingham is a stretch to far for me in a decade beginning with eight.
It is going to look nice Gregg !
Roy
Great work and of course those Bezels are rare! You are correct as well the material they made them from is crap. Mine were bubbly when I bought the car in the 60's and they still are, no rust of course just bubbly. Does annoy me but that is how they will stay.
It would be nice to put the cars together after 64 years apart, but Gregg for me now its too far the car would get there maybe, but although when working I was doing many thousands of miles driving to customers, now Hedingham is a stretch to far for me in a decade beginning with eight.
It is going to look nice Gregg !
Roy
RHD 356A coupe super 75 106954
-
- Put a fork in me, I'm done!
- Posts: 1852
- Joined: Thu Dec 25, 2008 2:28 pm
- Location: sunny sussex
Re: 356A Coupe restro
Sorry to clogg this thread up with 3 copies. ( it said do you wish io attach this as others have already done so. I clicked yes toom many times !!!!)
Roy
Roy
RHD 356A coupe super 75 106954
Re: 356A Coupe restro
No worries Roy, hopefully we can get them together later this year, once I get some miles under the belt will come to you.
So engine is moving to build up stage after several set backs with parts.
Untitled
Calibration looks a little out of date, Many years ago I was involved in the art of checking and calibrating measuring equipment, actually they very rarely change or go wrong
Untitled
Untitled
Getting finished in time for CLM is still on target. The plan has been ripped up and done again several times!
So engine is moving to build up stage after several set backs with parts.
Untitled
Calibration looks a little out of date, Many years ago I was involved in the art of checking and calibrating measuring equipment, actually they very rarely change or go wrong
Untitled
Untitled
Getting finished in time for CLM is still on target. The plan has been ripped up and done again several times!
1963 Karmann Ghia
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
-
- Nurse, I think I need some assistance
- Posts: 7759
- Joined: Mon Apr 16, 2012 4:31 pm
Re: 356A Coupe restro
Looks like there are some good components waiting to be used
Sent from my 22011119UY using Tapatalk
Sent from my 22011119UY using Tapatalk
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
- Bootsy
- Site admin and the Boss
- Posts: 23924
- Joined: Sat Nov 08, 2003 6:09 pm
- Location: Norwich
- Contact:
Re: 356A Coupe restro
Lovely
1972 911T | 1994 993 Carrera | 1999 986 Boxster | 1990 T25 Camper
Vintage Heuer, Omega, Zenith and other vintage watches - http://www.heuerheritage.co.uk
Vintage Heuer, Omega, Zenith and other vintage watches - http://www.heuerheritage.co.uk
-
- Nurse, I think I need some assistance
- Posts: 8748
- Joined: Sat Apr 23, 2005 9:08 pm
- Location: Nottingham, UK
Re: 356A Coupe restro
Looks awesome. Will you be outlining the two “darts” in the wings with a pinstripe or leaving them as they are?
The simple things you see are all complicated
I look pretty young but I'm just backdated yeah
I look pretty young but I'm just backdated yeah
Re: 356A Coupe restro
Thanks for the positive comments guys
There was a lot of talk about the wing darts, we did consider pinstripe in various colours, but thought from a distance you may only see the pinstripe. Also wanted to keep to the original 911 sport classic concept.
There was a lot of talk about the wing darts, we did consider pinstripe in various colours, but thought from a distance you may only see the pinstripe. Also wanted to keep to the original 911 sport classic concept.
1963 Karmann Ghia
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
-
- Put a fork in me, I'm done!
- Posts: 1852
- Joined: Thu Dec 25, 2008 2:28 pm
- Location: sunny sussex