Page 1 of 1

914 bulkhead/floor

Posted: Mon Jul 27, 2020 11:52 am
by KS
As to be expected, what looked like a relatively straightforward patch repair to the lower bulkhead on the passenger side of my 914 proved to be a little more involved. Here's what to expect...

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Re: 914 bulkhead/floor

Posted: Mon Jul 27, 2020 12:05 pm
by Bootsy
Great work from Ben

Re: 914 bulkhead/floor

Posted: Mon Jul 27, 2020 2:05 pm
by Gary71
Looks good for a good few years to come.

Re: 914 bulkhead/floor

Posted: Mon Jul 27, 2020 2:17 pm
by KS
Gary71 wrote:Looks good for a good few years to come.
Hopefully! The good thing was that it gave us the opportunity to see up inside the chassis section below the 'hell hole', which proved to be corrosion-free.
We could then liberally apply wax coating inside the chassis leg before sealing it all back up again.

Re: 914 bulkhead/floor

Posted: Mon Jul 27, 2020 8:41 pm
by Darren65
Very well executed Keith, looks great 8) :thumbright:

Re: 914 bulkhead/floor

Posted: Mon Jul 27, 2020 10:23 pm
by KS
Cheers – Ben certainly knows his stuff...