1969T tastefully modified
Moderator: Bootsy
-
- Me and DDK sitting in a tree! KISSING
- Posts: 2643
- Joined: Fri Apr 18, 2008 5:58 pm
- Location: Sunny Somerset, just above the water....
Re: 1969T tastefully modified
I've used RC6 on both the Hillclimb 911 and road/occasional Hillclimb 914/6. I agree with Smallspeed about the characteristics on the road, so the new RC5+ are probably better for that, but I can't comment since I haven't used them.
Also agree with him about your car! that will be fabulous with a nice 2.4S engine in the back!
JW
Also agree with him about your car! that will be fabulous with a nice 2.4S engine in the back!
JW
Life's a single timed run with no practice....
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber (now 3.5 litre on Management ) Part of the family for 39 years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber (now 3.5 litre on Management ) Part of the family for 39 years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT
Re: 1969T tastefully modified
Thanks all for the kind words about the car. It's fab and I'm very excited about the engine upgrade. I've been out in it quite a bit over the last week or so and we are getting to be good friends again. As I've been out blatting, the car definitely needs more roll control. So I'll redouble my efforts to get a front arb.
I've been scoping out the mods. The tank has a blocked off return fitting, so that bodes well for the extra fuel line. I need to decide whether to put the fuel pump at the front or in the engine bay.
The wiring in my engine bay is, er quite "adventurous" and I think will need some work to get it right. I don't know what all the electrical components I need for an MFI motor are nor what I have in there already. But there's not much on there! I'll post some pictures later for comment.
I've been scoping out the mods. The tank has a blocked off return fitting, so that bodes well for the extra fuel line. I need to decide whether to put the fuel pump at the front or in the engine bay.
The wiring in my engine bay is, er quite "adventurous" and I think will need some work to get it right. I don't know what all the electrical components I need for an MFI motor are nor what I have in there already. But there's not much on there! I'll post some pictures later for comment.
-
- Nurse, I think I need some assistance
- Posts: 18959
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Re: 1969T tastefully modified
Mine are the early pads, RC5, and can be very embarrassingly noisy, other times fine!
Squeal a bit under light braking, had them for about 8 years in the 911, still good.
Can also be a bit dusty on the rims, but it does not stick to the wheels, and kind to the discs.
Brakes are still the weakest part of my 911 esp when in today's traffic.
Servo might be next up.
Squeal a bit under light braking, had them for about 8 years in the 911, still good.
Can also be a bit dusty on the rims, but it does not stick to the wheels, and kind to the discs.
Brakes are still the weakest part of my 911 esp when in today's traffic.
Servo might be next up.
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
-
- I used to have a life, then came DDK
- Posts: 3856
- Joined: Mon Mar 31, 2008 12:38 pm
- Location: leicester
- Contact:
Re: 1969T tastefully modified
Next years project is to hunt down a nice similar colour scheme / age 912 as a home for this:jwhillracer wrote:Also agree with him about your car! that will be fabulous with a nice 2.4S engine in the back!
JW
2.3 litre, type 4 based, ITB’s / EFI, etc etc..
Re: 1969T tastefully modified
Nice motor Ben!
Re: 1969T tastefully modified
Picture of fuel tank fittings. Looks like I should be able to connect the return fuel line once fitted.
IMG_20200718_131218 by graham Ridgway, on Flickr
IMG_20200718_131218 by graham Ridgway, on Flickr
Re: 1969T tastefully modified
and now the wiring and electrical gubbins.
What are they...?
A silver box
A black box
and the CDI box
IMG_20200719_164952 by graham Ridgway, on Flickr
And a fuel pump and filter!
What are they...?
A silver box
A black box
and the CDI box
IMG_20200719_164952 by graham Ridgway, on Flickr
And a fuel pump and filter!
Re: 1969T tastefully modified
No relays. a two fuse panel with the three fuse cover.
All a bit of a mess really!
Need to work out what's needed for MFI.
IMG_20200719_164952 by graham Ridgway, on Flickr
All a bit of a mess really!
Need to work out what's needed for MFI.
IMG_20200719_164952 by graham Ridgway, on Flickr
Re: 1969T tastefully modified
Not much progress on the motor transplant, but I am going to pick up the fettled and serviced motor on Wednesday.
But I can report back on the brakes. I was very happy with the feel of the used Pagid blue pads I stuck in and I am very happy to report that they worked very well indeed on track at BH last week. Plenty of bite and the pedal felt ok and provided a good platform to HnT.
Perhaps with more practice and confidence I might reach the limit of brake capability, but it's not a race car, so I'll count brakes as sorted for the time being!
Graham
But I can report back on the brakes. I was very happy with the feel of the used Pagid blue pads I stuck in and I am very happy to report that they worked very well indeed on track at BH last week. Plenty of bite and the pedal felt ok and provided a good platform to HnT.
Perhaps with more practice and confidence I might reach the limit of brake capability, but it's not a race car, so I'll count brakes as sorted for the time being!
Graham
Re: 1969T tastefully modified
Right, back from hols, time to get going on the engine transplant project.
I'm thinking about the wiring and electrical components and whether I need the later mounting plate or would be better with it. The early mounting plates (65-69) are different from the later ones (70-73).
Any views?
Thanks
Graham
I'm thinking about the wiring and electrical components and whether I need the later mounting plate or would be better with it. The early mounting plates (65-69) are different from the later ones (70-73).
Any views?
Thanks
Graham
Re: 1969T tastefully modified
So the winter project starts. I delivered the car yesterday to the workshop where the engine transplant will happen. It's my friend who is a classic (predominantly race) car restorer and preparer.
I'm planning on spending some time there to do spannering and learn how it all goes together - especially doing the engine in/out as I've never done one on a 911!
I'll post some pics next week to make the thread more interesting. I've got a few things to work out...
When changing the flywheel from my 2.0 to the 2.4 to allow it to fit to a 901 box, are the flywheel bolts stretch ones and do I need to use new?
We have a general purpose clutch alignment tool (which is a bit naff), what do people use? We are thinking of leaving the box in the car, so will need to get the clutch lined up properly to avoind a lot of swearing!
Cheers
Graham
I'm planning on spending some time there to do spannering and learn how it all goes together - especially doing the engine in/out as I've never done one on a 911!
I'll post some pics next week to make the thread more interesting. I've got a few things to work out...
When changing the flywheel from my 2.0 to the 2.4 to allow it to fit to a 901 box, are the flywheel bolts stretch ones and do I need to use new?
We have a general purpose clutch alignment tool (which is a bit naff), what do people use? We are thinking of leaving the box in the car, so will need to get the clutch lined up properly to avoind a lot of swearing!
Cheers
Graham
-
- Me and DDK sitting in a tree! KISSING
- Posts: 2643
- Joined: Fri Apr 18, 2008 5:58 pm
- Location: Sunny Somerset, just above the water....
Re: 1969T tastefully modified
JWgridgway wrote: When changing the flywheel from my 2.0 to the 2.4 to allow it to fit to a 901 box, are the flywheel bolts stretch ones and do I need to use new? Use new ones, it's not worth the risk.
We have a general purpose clutch alignment tool (which is a bit naff), what do people use? We are thinking of leaving the box in the car, so will need to get the clutch lined up properly to avoind a lot of swearing!
There will be a LOT less swearing if you remove engine and box together! A general purpose tool ought to be OK as long as it centralises the centre plate properly.
Life's a single timed run with no practice....
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber (now 3.5 litre on Management ) Part of the family for 39 years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber (now 3.5 litre on Management ) Part of the family for 39 years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT
Re: 1969T tastefully modified
Thanks JW, the advice that the engine could be easily changed came from a reputable source, but it had me scratching my head a bit! That's that settled!
Just on the hunt for flywheel bolts as we speak!
Just on the hunt for flywheel bolts as we speak!
-
- Me and DDK sitting in a tree! KISSING
- Posts: 2643
- Joined: Fri Apr 18, 2008 5:58 pm
- Location: Sunny Somerset, just above the water....
Re: 1969T tastefully modified
Just a thought, will your 2 litre clutch handle the extra torque of the 2.4S? The one in our 914/6 with 168bhp is on the limit..........
JW
JW
Life's a single timed run with no practice....
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber (now 3.5 litre on Management ) Part of the family for 39 years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber (now 3.5 litre on Management ) Part of the family for 39 years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT