Page 1 of 1
Any idea where I can get one of these????
Posted: Thu Sep 19, 2019 2:43 pm
by alfietom
My Roller on my carb linkage hasn't been rolling causing a flat worn groove. This results in the throttle not always returning all the way back giving a fluctuating tick over.
The Part Number is: 911 1009 2100 ....Need one new or used.....just not grooved,
[url=https://flic.kr/p/2hhGmi3][img]htt ... .jpg[/img]IMG_3927 by [url=
https://www.flickr.com/photos/159958086@N07/]
Re: Any idea where I can get one of these????
Posted: Wed Sep 25, 2019 1:41 pm
by cschmueck
Hi Tom,
I used a small bearing:
https://simplybearings.co.uk/shop/advan ... rds=696ZZ+
Alternatively Rocky SRL in Italy will sell you the actuator assembly:
https://www.ebay.com/itm/ZENITH-40-TIN- ... SwGhxbu4sj
BTW that guy has everything- even if it is not listed.
Regards,
Christian
Re: Any idea where I can get one of these????
Posted: Wed Sep 25, 2019 2:10 pm
by alfietom
Hi Christian,
Thanks for that.....I've just ordered a pair. I had effected a repair using Model Bearings but the diameter of the bearing was considerably narrower so i thought its better to have the real deal.
Thanks again
Simon
Re: Any idea where I can get one of these????
Posted: Thu Sep 14, 2023 11:39 am
by Trevi1
Hello! I am looking for that spring!!
Thanks!
Sent from my iPhone using Tapatalk