Removing the top bolt from the ignition?
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
- Nurse, I think I need some assistance
- Posts: 7772
- Joined: Mon Apr 16, 2012 4:31 pm
Removing the top bolt from the ignition?
My 912 decided to stop turning over the starter this morning so I'm try to get the ignition switch out to check the connects. I can't c get a socket or spanner in to remove the top bolt?
Anyone done this before and any ideas?
Sent from my HTC One M9 using Tapatalk
Anyone done this before and any ideas?
Sent from my HTC One M9 using Tapatalk
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
-
- Nurse, I think I need some assistance
- Posts: 7772
- Joined: Mon Apr 16, 2012 4:31 pm
Re: Removing the top bolt from the ignition?
Success. That wasn't easy
Sent from my HTC One M9 using Tapatalk
Sent from my HTC One M9 using Tapatalk
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
-
- Nurse, I think I need some assistance
- Posts: 7772
- Joined: Mon Apr 16, 2012 4:31 pm
Re: Removing the top bolt from the ignition?
Not the ignition switch unfortunately
I can't get the light switch to fit without moving. Have I lost a spacer from the other side?
Sent from my HTC One M9 using Tapatalk
I can't get the light switch to fit without moving. Have I lost a spacer from the other side?
Sent from my HTC One M9 using Tapatalk
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
-
- Nurse, I think I need some assistance
- Posts: 7772
- Joined: Mon Apr 16, 2012 4:31 pm
Re: Removing the top bolt from the ignition?
Found the problem. This relay, next to the starter, had failed. I've removed and it starts
Sent from my HTC One M9 using Tapatalk
Sent from my HTC One M9 using Tapatalk
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
-
- Put a fork in me, I'm done!
- Posts: 1647
- Joined: Fri Mar 01, 2013 11:45 am
- Location: Kernow - good old Cornwall
Re: Removing the top bolt from the ignition?
Neil,
Thats a common fix that was used on Air-cooled VW’s to overcome poor wiring, and send a solid 12 volts to the starter motor.
Bit of a You Tube bit here.
https://www.youtube.com/watch?v=S-uhV8hIJYE
They are generally 30 Amp - not sure what yours is.
Ian
Thats a common fix that was used on Air-cooled VW’s to overcome poor wiring, and send a solid 12 volts to the starter motor.
Bit of a You Tube bit here.
https://www.youtube.com/watch?v=S-uhV8hIJYE
They are generally 30 Amp - not sure what yours is.
Ian
-
- Nurse, I think I need some assistance
- Posts: 7772
- Joined: Mon Apr 16, 2012 4:31 pm
Re: Removing the top bolt from the ignition?
Thank you. I was aware of the fix as I had one in my 356 but don't enjoy getting under the car to fix the problem
Sent from my HTC One M9 using Tapatalk
Sent from my HTC One M9 using Tapatalk
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
-
- Put a fork in me, I'm done!
- Posts: 1647
- Joined: Fri Mar 01, 2013 11:45 am
- Location: Kernow - good old Cornwall
Re: Removing the top bolt from the ignition?
Suggest you put it somewhere more accessible then if it fails again?