Mahle 100mm P/C set cylinder & heads for 3.3 or 3.5 engine
Posted: Sat Sep 30, 2017 5:53 pm
I have a set of used parts from an engine originally built in the USA by Andial, and features Mahle 100mm pistons/cylinders. A set of modified cylinder heads with nicely matched squish band area, based on 3.0 SC heads and also configured for MFI. The port could be easily blanked for non MFI configuration
Built from an SC base engine the capacity equates to 3.3 litre shortstroke, or using a 3.2 Crank would make a 3.5 litre.
Price is £2500 (6 pistons/cylinder set and 6 x cylinder heads complete with valves/springs)
If anyone has interest, I'll post some pictures next week
Built from an SC base engine the capacity equates to 3.3 litre shortstroke, or using a 3.2 Crank would make a 3.5 litre.
Price is £2500 (6 pistons/cylinder set and 6 x cylinder heads complete with valves/springs)
If anyone has interest, I'll post some pictures next week