pre '73 bonnet latch pin 901.511.051.21

amallagh · Post by **amallagh** » Sun Aug 27, 2017 7:07 pm

Hi, I'm after a pre '73 bonnet latch pin 901.511.051.21
Please PM if you can help.
Cheers
Andrew

amallagh · Post by **amallagh** » Wed Sep 13, 2017 8:04 pm

If anyone just has the pin assembly with the spring, end cone and base nut then that would be OK also ?

Peter Roberts · Post by **Peter Roberts** » Fri Sep 15, 2017 7:18 pm

I have a complete one with receiver that came from a late 356 or a 912 but is the same i believe. send me your email address and i will send you photos. Find it difficult to post photos on this site

pht9 · Post by **pht9** » Fri Sep 15, 2017 7:47 pm

amallagh wrote:Hi, I'm after a pre '73 bonnet latch pin 901.511.051.21
Please PM if you can help.
Cheers
Andrew

Andrew,

give me a buzz on Monday, we have plenty

amallagh · Post by **amallagh** » Sat Sep 23, 2017 11:21 pm

This is what I still have. I just need the m12x1.0 pin assembly with spring and base locking nut that screws into it. Anyone ?

210bhp · Post by **210bhp** » Mon Oct 02, 2017 12:42 am

https://www.thesamba.com/vw/classifieds ... id=2014781

Regards
Mike

T911UK · Post by **T911UK** » Mon Oct 02, 2017 9:58 am

Or buy a new one for alot less;

http://type911shop.co.uk/epages/de867ca ... ducts/9093

210bhp · Post by **210bhp** » Mon Oct 02, 2017 10:12 am

Looks cr@p

Regards
Mike

amallagh · Post by **amallagh** » Mon Oct 02, 2017 5:28 pm

If bought a couple of the repros and shape is OK but quality of the metal is poor. In fact I have a new repro one in my hand. They are relatively easy to bend compared to the originals but look OK cosmetically.

The intent of this post is to try to find someone with the pin/spring/nut part so I can simply refit it to the replated BROMO original I have. Very annoying that the platers have lost the pin but that's they way it is.

So if anyone has a spare pin/spring/nut then let me know.
Regards
Andrew

210bhp · Post by **210bhp** » Mon Oct 02, 2017 6:24 pm

Isn't that the part which dissolves during the plating process? No wonder they have lost it.
I think Jamie had the same problem.

Regards
Mike

amallagh · Post by **amallagh** » Thu Nov 30, 2017 8:36 am

I'm still after the pin, spring, nut assembly for my pre '73 bonnet latch

veertientien · Post by **veertientien** » Fri Dec 15, 2017 3:18 pm

I have a spare pin, spring and nut but without the magnesium cup. Just pm me and I will send you a picture.

Kind regards,

Cees

amallagh · Post by **amallagh** » Sun Dec 17, 2017 3:50 pm

I'm still after a M12X1.0 bonnet pin assembly with nut/spring etc.

(Cees's pin was an M8 rear engine lid latch pin so not what I was after)

911hillclimber · Post by **911hillclimber** » Wed Dec 20, 2017 11:40 am

Andy, found this pin, collar, nut and spring as I was searching for something else today whilst working on my 911.

Thread is a very fine M12
parts are off a 1973 T front hood latch.

All yours if you need them for a donation to the DDK Charity Fund.

Graham.

amallagh · Post by **amallagh** » Wed Dec 20, 2017 2:16 pm

Thankyou Graham, just what I needed.
I'll send you a PM
Cheers
Andrew

DDK - Die Deutschen Klassiker

pre '73 bonnet latch pin 901.511.051.21

pre '73 bonnet latch pin 901.511.051.21

Re: pre '73 bonnet latch pin 901.511.051.21

Re: pre '73 bonnet latch pin 901.511.051.21

Re: pre '73 bonnet latch pin 901.511.051.21

Re: pre '73 bonnet latch pin 901.511.051.21

Re: pre '73 bonnet latch pin 901.511.051.21

Re: pre '73 bonnet latch pin 901.511.051.21

Re: pre '73 bonnet latch pin 901.511.051.21

Re: pre '73 bonnet latch pin 901.511.051.21

Re: pre '73 bonnet latch pin 901.511.051.21

Re: pre '73 bonnet latch pin 901.511.051.21

Re: pre '73 bonnet latch pin 901.511.051.21

Re: pre '73 bonnet latch pin 901.511.051.21

Re: pre '73 bonnet latch pin 901.511.051.21

Re: pre '73 bonnet latch pin 901.511.051.21