Re: Project Blue Book
Posted: Mon Apr 25, 2022 8:59 am
Time to put shiny stuff on :bandit:
Discs have arrived along with back plates to start the assembly of the finished brake system.
So front buttoned up and onto the rears.
More pressing out of studs for the longer 66mm ones.
Discs need some machining to suit this application. As I have gone to 5 stud configuration I have had to use the discs off of the 914-6 which ar a bit bigger.
Always keep the old ones. You never know when you might need to refer to them...
Next job was to install the drop link bushed for the rear anti roll bar. Again the press was very useful!
So coming together
Discs have arrived along with back plates to start the assembly of the finished brake system.
So front buttoned up and onto the rears.
More pressing out of studs for the longer 66mm ones.
Discs need some machining to suit this application. As I have gone to 5 stud configuration I have had to use the discs off of the 914-6 which ar a bit bigger.
Always keep the old ones. You never know when you might need to refer to them...
Next job was to install the drop link bushed for the rear anti roll bar. Again the press was very useful!
So coming together