914 2.0 > 3.0 GT Conversion

Ongoing and archived Porsche (and other marques) restoration threads from DDK members

Moderator: Bootsy

defianty
Put a fork in me, I'm done!
Posts: 1717
Joined: Sat Aug 05, 2006 7:02 pm
Location: Rochford, Essex

Re: 914 2.0 > 3.0 GT Conversion

Post by defianty »

It turned out there was actually more wrong with the car than initially thought although nothing too serious.

After the carbs were rebuilt again the car went to the rolling road but things didn't go to plan and it was discovered the distributor wasn't at all well.

With what we're all facing now the car, with it's now functioning distributor, won't be heading back to the rolling road for a while. So as it was running well enough to drive, earlier in the week I collected it.

Huge thanks to Simon Rudge for his assistance in getting the car up and running.

Once again sharing the same garage as 23e Heure's GT
Image

The car was about an hour from me in the North Essex countryside. It was a beautiful day and the drive home on deserted country roads was fantastic and just the ticket from being stuck indoors.

Obligatory stop for a quick photo.
Image

Whilst the car was with Simon I also got him to install a Rennshift performance shifter. Such an improvement and one I'd thoroughly recommend to any 914 owner.

Image

So far the performance of the car meets my expectations but I'll do a full write up at a later date when everything it properly dialled in and we can get back out on the roads again.
Stephen

1973 914 3.0 GT Build Progress
1974 TR6

914 Rear Alignment Shims
User avatar
bjmullan
Me and DDK sitting in a tree! KISSING
Posts: 2978
Joined: Fri Apr 30, 2004 2:15 pm

Re: 914 2.0 > 3.0 GT Conversion

Post by bjmullan »

Good to hear all is well Stephen 8)

This is a great shot and one for the 2021 calendar!
defianty wrote: Obligatory stop for a quick photo.
Image
Brendan
1969 911T
2007 2.7 Boxster

Pray, hope and don't worry - Padre Pio
johnM
I need to get out more!
Posts: 3391
Joined: Mon Apr 03, 2006 10:27 pm
Location: Lake District

Re: 914 2.0 > 3.0 GT Conversion

Post by johnM »

That’s fantastic news Stephen.

Car looks stunning and I bet it’s a hoot to drive.

These home restorations are the ones I enjoy reading about the most and yours has been outstanding. The quality and attention to detail surpasses a lot of professional restorations and makes my effort a few years ago seem amateurish.

Here’s to some great drives out in the future.

Health and well-being to all. Keep safe.
John
1970 2.2E Coupe.
2004 996 GT3 mkII
2015 Skoda Octavia VRS TSI DSG.
2021 Toyota GR Yaris Circuit Pack
impmad2000
I need to get out more!
Posts: 3300
Joined: Fri Nov 14, 2003 8:31 am
Location: Leicester, a convenient mid point !
Contact:

Re: 914 2.0 > 3.0 GT Conversion

Post by impmad2000 »

I remember getting my car on the road for the first Le Mans classic, it was runny ok, but wouldn’t tune up at all. I didn’t care, it was running.
I later found a setting in the EFI that I had wrong and ever dropped into place. It was well worth the wait and so rewarding. It just got better and better ever since.
The best part of the project is the journey, along with all its frustrations, it makes the enjoyment even more special.
It looks cracking, it will soon be all you expect and more .
Tim Bennett
RHD Targa 2.2T EFI, Triumph ITB's, EDIS and Megasquirt.
"Old enough to know what's right and young enough not to choose it"
#1153
rhd racer
DDK 1st, 2nd and 3rd for me!
Posts: 2030
Joined: Wed Jun 23, 2004 9:47 pm
Location: Nottinghamshire

Re: 914 2.0 > 3.0 GT Conversion

Post by rhd racer »

Looks awesome Stephen, really pleased it is all sorted and you have it home. For most, the lockdown would be an opportunity to tweak, improve etc, but it is such perfection already I think you will just have to take it for ‘essential shopping’ and put some gentle miles on it....
93 964 C2
99 Boxster 2.5 > 2.7 hill climber

71 914/6 3.0 - gone

'You see Paul, hill climbing is like making love to a beautiful woman. You get your motor running, check your fluids, hang on tight and WHOA..30 seconds later it's all over!' Swiss Tony
jtparr
DDK 1st, 2nd and 3rd for me!
Posts: 2230
Joined: Mon May 24, 2004 10:54 pm
Location: london/surrey

Re: 914 2.0 > 3.0 GT Conversion

Post by jtparr »

Hi Stephen

Building the car is just part of the journey

You have done such an amazing job so far am sure the rest will be treated to the same amount of fastidious detail....and be perfect when finished...

All the best
Jp
1974 2.7 Carrera
(full restoration. now as an RS Touring)
1963 3.8 E Type
( 11 years in the making…………………….)
1952. XK120…the next one ……….……..)
defianty
Put a fork in me, I'm done!
Posts: 1717
Joined: Sat Aug 05, 2006 7:02 pm
Location: Rochford, Essex

Re: 914 2.0 > 3.0 GT Conversion

Post by defianty »

Opportunities to get out are obviously few and far between right now, but there's no harm in extending an essential trip, is there :wink:

Image

Image
Last edited by defianty on Sat May 02, 2020 1:19 pm, edited 1 time in total.
Stephen

1973 914 3.0 GT Build Progress
1974 TR6

914 Rear Alignment Shims
sladey
Nurse, I think I need some assistance
Posts: 8632
Joined: Sat Apr 23, 2005 9:08 pm
Location: Nottingham, UK

Re: 914 2.0 > 3.0 GT Conversion

Post by sladey »

I”m not a big 914 fan but that looks gorgeous. Absolutely gorgeous. You should be proud of what you’ve achieved
The simple things you see are all complicated
I look pretty young but I'm just backdated yeah
User avatar
Bootsy
Site admin and the Boss
Posts: 23845
Joined: Sat Nov 08, 2003 6:09 pm
Location: Norwich
Contact:

Re: 914 2.0 > 3.0 GT Conversion

Post by Bootsy »

What Slothey said
1972 911T | 1994 993 Carrera | 1999 986 Boxster | 1990 T25 Camper

Vintage Heuer, Omega, Zenith and other vintage watches - http://www.heuerheritage.co.uk
911hillclimber
Nurse, I think I need some assistance
Posts: 18858
Joined: Mon Mar 10, 2008 6:26 pm
Location: West Midlands

Re: 914 2.0 > 3.0 GT Conversion

Post by 911hillclimber »

The classic form of a Boxster!

What a great car with all the right bits and execution. :)
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
User avatar
KS
Nurse, I think I need some assistance
Posts: 14919
Joined: Fri May 07, 2004 3:12 pm
Location: Cornwall

Re: 914 2.0 > 3.0 GT Conversion

Post by KS »

Ab fab!
Keith Seume
Follow on Instagram @orange914
My YouTube channel
theorangeperil
DDK forever
Posts: 650
Joined: Sat Nov 15, 2003 9:51 pm
Location: London

Re: 914 2.0 > 3.0 GT Conversion

Post by theorangeperil »

i'd missed the previous updates (as you know i've been kinda busy) but just seen them now. fantastic news its all sorted and it looks fantastic. you must be made up!
Peter
'69 911T UK RHD enjoying since 2002
'86 924S - Gone but not forgotten. Porsche's best kept secret...
'04 911 40th Anniversary now gone
'11 911 GTS manual of course...
User avatar
hot66
Moderator
Posts: 18221
Joined: Tue Nov 11, 2003 4:17 pm
Location: North Yorkshire

Re: 914 2.0 > 3.0 GT Conversion

Post by hot66 »

That looks well 8)
James

1973 911 2.4S
1993 964 C2
2010 987 Spyder
1973 MGB Roadster

Its not how fast you go, but how you go fast ;)
defianty
Put a fork in me, I'm done!
Posts: 1717
Joined: Sat Aug 05, 2006 7:02 pm
Location: Rochford, Essex

Re: 914 2.0 > 3.0 GT Conversion

Post by defianty »

I think they call this a thread resurrection!

The journey is never over and it's time for a well overdue update. Although not an update I wanted to do.

Since hitting the road with the finished car it hasn't all been good. In fact, I've had very little enjoyment out of it since completion and sadly I've only covered just over 1000 miles. Most of those were spent wondering if the engine was going to get me home due the rattling sounds it was making and the ever decreasing oil pressure. :x

During the summer last year after heading back from a local car and coffee meet things took a turn for the worse and the car was seriously down on power. Having exhausted every option available to me I pulled the engine out of the car, stuck two fingers up at it, closed the garage door and walked away.

It was months until I got back stuck back in after I'd gained some enthusiasm and rapidly running out of time to get the car to Le Man for the Classic.

After many hours of research I encouraged to do a DIY rebuild of the engine. It still scares the hell out of me saying that but the more I get stuck in the more my confidence builds.

I'm just on the strip down and investigative stage at the moment, but I'm enjoying the process and learning lots along the way.


That day about eight months ago when I decided enough was enough!

Image


Ancillaries off and getting down to it.

Image

Image


The first unexpected surprise! - 3.2L heads

Image

Image


New workbench with little space left already!

Image


Next step is to split the case - this shot was taken before I got a new engine yoke.

Image


More updates soon as we get inside this thing!
Stephen

1973 914 3.0 GT Build Progress
1974 TR6

914 Rear Alignment Shims
911hillclimber
Nurse, I think I need some assistance
Posts: 18858
Joined: Mon Mar 10, 2008 6:26 pm
Location: West Midlands

Re: 914 2.0 > 3.0 GT Conversion

Post by 911hillclimber »

Before you pulled it apart did you do any compression tests etc?

I'm on the same page as you, just get stuck in as everything will come apart anyway, so NO criticism inferred.
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Post Reply