engine and gearbox mounts?
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
engine and gearbox mounts?
ok so i finally grew a pair and fitted some superpro engine mounts to my 71 911T and also a rsr style engine support last sunday which to be fair was easier than i thought,first 911 and all that,my question is can you get the super pro polyurethane mounts that fit to the gearbox?or are they the same as the rear or front engine mounts? i seen a picture on KS thread of his gearbox and it had the purple mounts on it but i can't seem to find much info on those ones,any help would be cool,thanks Andy.
-
- Nurse, I think I need some assistance
- Posts: 9424
- Joined: Sat Nov 08, 2003 6:59 pm
- Location: East Sussex
- Contact:
Re: engine and gearbox mounts?
You should have been supplied with 4 identical bush sets, to do the engine and the gearbox mounts, all in one kit.
Re: engine and gearbox mounts?
no it was just a pair for the engine mounts and they are powerflex ones,I'm guessing powerflex do the box separate ?
Re: engine and gearbox mounts?
no power flex don't do the gearbox ones,useless,will have to get the super pro ones now,I'm still learning,the hard way.
-
- Nurse, I think I need some assistance
- Posts: 9424
- Joined: Sat Nov 08, 2003 6:59 pm
- Location: East Sussex
- Contact:
Re: engine and gearbox mounts?
You need a second set of whatever you bought
-
- Me and DDK sitting in a tree! KISSING
- Posts: 2697
- Joined: Thu May 21, 2009 2:54 pm
- Location: Kent
Re: engine and gearbox mounts?
Can you get the geabox carrier bush for the 901/ type 911 dogleg box then. ?
70T barn find...... to ST.
1998 C2 996 Kettle
1998 C2 996 Kettle
-
- Nurse, I think I need some assistance
- Posts: 9424
- Joined: Sat Nov 08, 2003 6:59 pm
- Location: East Sussex
- Contact:
Re: engine and gearbox mounts?
All 901/911/915/G50 use the same bush
Re: engine and gearbox mounts?
your right Nick i do need to get another set of those powerflex ones,i should have just bought the super pro ones.
- KS
- Nurse, I think I need some assistance
- Posts: 14997
- Joined: Fri May 07, 2004 3:12 pm
- Location: Cornwall
Re: engine and gearbox mounts?
Powerflex supplied both my engine and gearbox bushes... If you read the web catalogue it says how many you need, in this case, two packs (one for engine bar, the other for the gearbox).
http://www.powerflex.co.uk/road-series/ ... /1847.html
http://www.powerflex.co.uk/road-series/ ... /1847.html
Re: engine and gearbox mounts?
yeah its my fault i just bought a pair from ebay for the engine and i thought the gearbox ones were different but it turns out there the same,will order another set,thanks for your help.