DDK - Die Deutschen Klassiker

I have porsche factory workshop manual for single,two,three and four cylinder tractors.(p111,122,133,144.also standart 218 ,ap17,18,22,there is sone additions to upgrade to higher power etc...) hade it since i used to work on them ,but dont need it anymore.not the cleanest one after all,maybe page or two are missing,but still very usefull.im willing to take efforts to put it on cd ,maybe with some corrections and cleanups ...

http://s865.photobucket.com/user/madnes ... l%20manual

dont wanna sell it either to single person.is there any way you guys would suggest to share it between them who needs for a simbolic fee directed to ddk charity?

Madness, I am looking for a workshop manual, as I am planning on doing an Engine rebuild in May.
Can you let me know if its English or German text. I would be interested in the CD, or some hardcopies of the engine section if that were possible. I have a Super 308N, so would this be similar to the p133 engine.

Thanks J.D.

Hi ,
i did a super engine rebuild with this manual about 4 years ago...worked for me very well.its in English- not very common...i dont know how it gonna work with printouts, but cd will be done.if you going towards limerick at some stage let me know and maybe you can borrow it.
cheers M.

Thats Super, maybe I can get some tips as well as I have no idea whats involved, and I have never done a rebuild, I will pm you if Im heading that way. In the meantime let me know when the cd is ready as I will be buying one.

Cheers JD.

there is sone additions to upgrade to higher power etc...

I would be very interested in seeing these.

Regards....Chris

Hi Madness
I would be very interested in a CD copy of this manual, and am more than willing to pay for it.
Please let me know if, and when you get it copied and costs.
Many thanks
Ian

Gents,
pdf format cd is in progress of making.it takes a little time cause every page has to be digitally cleaned from greasy finger prints,etc.as soon it will be ready everyone gets a copy.
thanks for your interest to good cause.
regards M

I would like a copy please. Happy to pay to spread the costs.
David

Hi.
I would also like a copy if possible.
For some reason I have just bought a twin cylinder.
Should be fun getting it up and running again.
Cheers.
John.

John did you buy the Standard on eBay in Taunton?

I'd like a copy too please - I'll pay you!

Regards.

Gill

Hi Gill.
I bought one from a guy in Heston (Cornwall)
Yes it was off of eBay, so might be the same one.
He has loads of them!!!
No idea how much one should cost but it runs and even drives.
First job is to sort out some dodgy wiring.
Cheers.
John.

Any update on this manual etc ?

Chris

madness wrote:Gents,
pdf format cd is in progress of making.it takes a little time cause every page has to be digitally cleaned from greasy finger prints,etc.as soon it will be ready everyone gets a copy.
thanks for your interest to good cause.
regards M

Any more progress ?

Chris

I would also be interested in a copy, please let me know when it's ready.

Regards,

Jonny.

Ps. I also bought my tractor from the guy in Helston.

irish9142000,butzsi,914-6, dcraigmyle , 911st , vwgillybilly , Jonnysc
Im very sorry for such a enormous delay.
the manual is ready to go in pdf. i could burn it to the disc and send or any other way.
allow me to contact Bootsy first- to figure out the way for the donations.
thanks.