Where can I buy a front valance ( If that's the correct term) like the one on Bob Tiltons car here ?........
http://jok-r.skynetblogs.be/tag/r+gruppe
My car is a 72 T and currently has an S/RS type valance and I'd like to fit one of these instead
Thanks
Front Valance
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
- I need to get out more!
- Posts: 3119
- Joined: Tue Apr 21, 2009 4:12 pm
- Location: Killaloe, Ireland
- Contact:
Re: Front Valance
That looks like a standard early non S valance to me.
Dansk do them now, so most of the normal suppliers can get them.
Cheers
Jon
Dansk do them now, so most of the normal suppliers can get them.
Cheers
Jon
-
- Nurse, I think I need some assistance
- Posts: 8059
- Joined: Sat Feb 28, 2004 12:28 am
- Location: Scotland
Re: Front Valance
I have exactly that set up front and rear available.
Metalwork by Barry (perfection) all trim holes welded up front and rear for that smooth finish and the fog light holes exposed on the front spoiler (I also have the refinished covers), bumper brackets, and everything primed ready for your finishing and painting in the colour of your chioce. The items have zero rust and Barry had to put very little new metal in anything to make perfect.
I also have an engine lid prepared in exactly the same way by Barry. It is a swb lid with the centre bar and Barry welded up the letter holes for that clean finish (ready for a 'Porsche' sticker) and is in the same primer ready for finishing and painting. No rust and a tiny bit of new metal only. I also have the swb engine lid grille which I am just finishing refurbishing which is in excellent condition. It has new bolts (hard to get) and other hardware all round.
All these items came off the same car and they have been refurbished no expense spared. Once painted they are ready to bolt on. Pm me for pictures and a price if you have any interest. Pictures may take a day or two as the metal parts are stored away until I finish the grille.
Metalwork by Barry (perfection) all trim holes welded up front and rear for that smooth finish and the fog light holes exposed on the front spoiler (I also have the refinished covers), bumper brackets, and everything primed ready for your finishing and painting in the colour of your chioce. The items have zero rust and Barry had to put very little new metal in anything to make perfect.
I also have an engine lid prepared in exactly the same way by Barry. It is a swb lid with the centre bar and Barry welded up the letter holes for that clean finish (ready for a 'Porsche' sticker) and is in the same primer ready for finishing and painting. No rust and a tiny bit of new metal only. I also have the swb engine lid grille which I am just finishing refurbishing which is in excellent condition. It has new bolts (hard to get) and other hardware all round.
All these items came off the same car and they have been refurbished no expense spared. Once painted they are ready to bolt on. Pm me for pictures and a price if you have any interest. Pictures may take a day or two as the metal parts are stored away until I finish the grille.
_____________________________
73 RS (Sold)
67 S
Mint T (Sold)
996 Turbo (Sold)
73 2.4E (home after 25 years) and Sold again
73T targa (signal yellow project)
1953 Vauxhall Velox
914/6
1963 356B
https://www.mybespokeroom.com/
73 RS (Sold)
67 S
Mint T (Sold)
996 Turbo (Sold)
73 2.4E (home after 25 years) and Sold again
73T targa (signal yellow project)
1953 Vauxhall Velox
914/6
1963 356B
https://www.mybespokeroom.com/
-
- Nurse, I think I need some assistance
- Posts: 4206
- Joined: Fri Nov 14, 2003 3:10 pm
- Location: Bournemouth
- Contact:
Re: Front Valance
The front bumpers are also available new. From Porsche retail at £818 and the Dansk version is £702 retail. All plus VAT. I keep both versions in stock, please email for our prices.
Thanks
Alan
Thanks
Alan
http://www.canfordclassics.co.uk
Porsche Restoration & Sales
Porsche Restoration & Sales
Re: Front Valance
I will be changing mine very soon. I have a metal ( no rust) earlier front valance that I will be changing for a S style as it was an option on my E in 72/73.
It will have the spot light covers but will not have the alloy rubber section as I will transfer that to my S bumper.
Is this what you want.
steve
It will have the spot light covers but will not have the alloy rubber section as I will transfer that to my S bumper.
Is this what you want.
steve
Re: Front Valance
Hi Steve , be prepared for some front end lift if you are doing over 100 (!).....mine gets quite lively at Goodwood...PS you have PM.sng45 wrote:
My car is a 72 T and currently has an S/RS type valance and I'd like to fit one of these instead
Thanks