Page 1 of 1
Where is this wire supposed to be connected?
Posted: Thu Jan 07, 2010 5:34 pm
by sdimbylow
Hi all,
Does anyone know what this extra wire is for? The loom may not be original but I thought it was worth asking to see if other cars have this connected to something. My car is a 1965 RHD 912 but was restored in 1995.
I'm in the process of stripping the boot back to bare metal so please ignore the rust
Many thanks,
Steve
Posted: Thu Jan 07, 2010 5:50 pm
by Nick Moss
Looks like the wires to the bonnet light switch
Posted: Thu Jan 07, 2010 6:00 pm
by Ian 2.2S
Hi Steve,
I am guessing a bit here, but is it the connection into the 'bonnet' loom, i.e. the supply to the trunk lights?
Ian
Nick got there before I submitted it, he is probally right.
Posted: Thu Jan 07, 2010 8:49 pm
by sdimbylow
Thanks.
I don't think there is a bulb (or bulb holder for that matter) in the boot lid so that might explain why the wire doesn't go anywhere. I'll investigate tomorrow.
Cheers,
Steve
wire colour
Posted: Fri Jan 08, 2010 9:46 pm
by 911-356 dave
Hi, If you pull back the wire cover just a bit it should reveal the wire colour, I suspect that the loom has been altered at some time as on a 1965 912 there should be a washer pump and wing mounted washer bottle to the left of the wire. If you let me know the wire colour I will get back to you.
Cheers Dave
Posted: Thu Feb 11, 2010 8:38 pm
by sdimbylow
Hi All,
Thanks for your help. The wire is for the bonnet loom to supply the trunk light. The loom is missing so I will have to sort that out. It will be quite a luxury to have some illumination in the boot.
Work on the boot stripping back is going well, here is a picture of the progress so far. I am scraping it all off with a blunt chisel so blood, sweat and tears have literally gone into this bit of restoration!
Cheers,
Steve
Posted: Fri Feb 12, 2010 9:23 am
by atomman
I have the bonnet loom out of my 65 car at the moment,
so if you need a picture of it to make a copy i can take a photo for you
Posted: Fri Feb 19, 2010 5:56 pm
by merbesfield
I have a similar question. Mind you my car is a LHD US car. What do these two plugs go to?
http://s862.photobucket.com/albums/ab18 ... =trunk.jpg
edit, apparently I am slow, I am having trouble figuring out how to post a pic? I read FAQ but don't understand it.