Can anyone help?
If fitting 7R's to the rear of a 1970 911, what size shims are required?
7R rims
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
- Nurse, I think I need some assistance
- Posts: 16854
- Joined: Wed Nov 12, 2003 10:48 pm
- Location: Worcs/W Mids border
It varies to some extent from car to car & depends what make & size of tyre you fit, whether your suspension is standard (or uprated) & whether or not you have increased negative camber.
Minimum spacer is usually 6mm up to about 18mm.
Minimum spacer is usually 6mm up to about 18mm.
Andy
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
- Bootsy
- Site admin and the Boss
- Posts: 23904
- Joined: Sat Nov 08, 2003 6:09 pm
- Location: Norwich
- Contact:
If anyone is after some there are two at Karmann Konnection (fully polished) for £1100 the pair
1972 911T | 1994 993 Carrera | 1999 986 Boxster | 1990 T25 Camper
Vintage Heuer, Omega, Zenith and other vintage watches - http://www.heuerheritage.co.uk
Vintage Heuer, Omega, Zenith and other vintage watches - http://www.heuerheritage.co.uk
-
- DDK slapper chatter
- Posts: 402
- Joined: Thu Mar 11, 2004 5:43 pm
- Location: IOS... IrishOverSeas: Bath
...Might seem like a silly question but are these shims like washers or complete plates of various thickness with holes drilled ?
...got any pictures ?
...got any pictures ?
Cheers
Hig
I used to have a 72 911 I drove every day... Now I have projects...
'73 911 Track car ...being put back together
'59 Conv D... refit underway...Upholstery done !!
Hig
I used to have a 72 911 I drove every day... Now I have projects...
'73 911 Track car ...being put back together
'59 Conv D... refit underway...Upholstery done !!
-
- Nurse, I think I need some assistance
- Posts: 16854
- Joined: Wed Nov 12, 2003 10:48 pm
- Location: Worcs/W Mids border