Early Parcel shelf remanufacture
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
Early Parcel shelf remanufacture
Hi we have nearly finished the tool to press out new pre 71 rear parcel shelves and seat backs.
We need 4 ourselves for various jobs, and was wondering who else needs one, so I can keep costs down, and make them as a batch in one go.
Forgot to say the panel will be made in one piece,(without the join near the seat top) and the cost is £350. Qty discounts are available.
regards Jeff
We need 4 ourselves for various jobs, and was wondering who else needs one, so I can keep costs down, and make them as a batch in one go.
Forgot to say the panel will be made in one piece,(without the join near the seat top) and the cost is £350. Qty discounts are available.
regards Jeff
Last edited by 912jeff on Wed Jul 16, 2008 8:47 am, edited 2 times in total.
Fenn Lane Motorsport 01455 213998
1965 porsche 912
1965 porsche 912
-
- Nurse, I think I need some assistance
- Posts: 4206
- Joined: Fri Nov 14, 2003 3:10 pm
- Location: Bournemouth
- Contact:
Hi,
I am interested in seeing some pics if possible and do need a couple.
With thanks
Alan
I am interested in seeing some pics if possible and do need a couple.
With thanks
Alan
http://www.canfordclassics.co.uk
Porsche Restoration & Sales
Porsche Restoration & Sales
Heres a picture of the tool before it is cast, It will be pressed flat, and then curved to reduce tooling costs
[/img]
I am aware that this is the slightly later shelf but it will fit the early, 65 on cars. depending on requirements, the tool can be modified at a later date for the earlier style
regards jeff
[/img]
I am aware that this is the slightly later shelf but it will fit the early, 65 on cars. depending on requirements, the tool can be modified at a later date for the earlier style
regards jeff
Fenn Lane Motorsport 01455 213998
1965 porsche 912
1965 porsche 912
parcel shelves
Hello there
Does anybody know if the parcel shelves are now available
regards
Paul
Does anybody know if the parcel shelves are now available
regards
Paul
Parcel Shelf Re-manufacture
Well we finally have an acceptable casting for the tooling. We had to reject the first casting due to porosity and the second one caused some other problems and wouldn't machine flat to mount to the steel plate.
This one is fine and we will press panels as soon as we can book time on the press which we are desperately trying to do before the holiday.
This one is fine and we will press panels as soon as we can book time on the press which we are desperately trying to do before the holiday.