Page 1 of 1

tyre profiles.. what are you using?

Posted: Tue Jan 15, 2008 7:18 pm
by vwretrosteve
i am having trouble working out the best tyre profile and brand to suit my early 911 on 6x15 fuchs.
the car is lowered a bit,and asthetically i dont really wish to over tyre it,nor do i wish to have a typical ultra low profile tyre either. (it was on 14"'s ..hence the connundrum)
the car has a re worked 3.2 motor and does get hustled a bit :roll:

i would be interested to hear what tyres people are using,and hopefully i can make an informed descision from information received .

thanks

Posted: Tue Jan 15, 2008 7:42 pm
by Mick Cliff
195/65 x 15 front
205/60 x 15 rear

Same (almost) overall diameters as 'original' 185/70 x 15 but much more choice of manufacturers and more 'cost effective' imho

Posted: Wed Jan 16, 2008 2:03 pm
by domtoni
I was at the recent Autosport show, and met Pirelli. Pirelli showed their P7 and P6/6000 tyres. They noted that the P7 is better for performance vehicles than the P6 (as P7 has a sold rib in the tread which P6 does not have).

On my 15 x 6 fuchs, I have 196/65x65 all around. They work more than well. With more grunt, I think you can get 205/60 x 15 on the rear wheels without rubbing (but have not tried this combo).

Perhaps others can give us some advise.

Best
Dom

Posted: Wed Jan 16, 2008 6:53 pm
by stuby
General consensus is 195/65 on 6s

Stu

Posted: Wed Jan 16, 2008 8:00 pm
by peter stey
205/60/15 Bridgestone potenza re720 front and rear. Very pleased with this tyre, but unfortunately Bridgestone decided to discontinue them.

http://www.classic-action.nl/Fotomap/Li ... _1844.html

Posted: Fri Jan 18, 2008 7:43 pm
by vwretrosteve
after exhaustive tyre discussions over a curry ,with some fellow early car owners i have decided to use 195/60's -sticky ones though :wink: