Restoring an engine lid grill

An archive of any Porsche 911 technical threads

Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin

Alan @ CanfordClassics
Nurse, I think I need some assistance
Posts: 4206
Joined: Fri Nov 14, 2003 3:10 pm
Location: Bournemouth
Contact:

Restoring an engine lid grill

Post by Alan @ CanfordClassics »

Hi,

Good engine lid grills are becoming hard to find so I decided to test restoring them. Here are the results.

Firstly I had to carefully remove each bar from the grill and then have each individual bar polished (and re-anodised if required). Here are the bars after polishing.

Image

As expected during transport, polishing and (if required) anodising, these bars are very easily bent and twisted. Each bar therefore required work. Also the polishing removes the numbers which are stamped on each bar. I thus used a spare grill to match the location of each bar on the grill.

Image

In the mean time the grill is prepped and painted

Image

Each bar is then individually added and adjusted to match to the correct curve and spacing between each bar. This is a time consuming process but the results I think are worth it.

Image

I need another half hour tomorrow making some more adjustments but considering this grill was awful I am pretty happy with the results, or maybe I am being to anal :lol:

Image

Thanks
Any feedback or comments would be much appreciated.
Alan
Last edited by Alan @ CanfordClassics on Fri Feb 09, 2007 9:02 pm, edited 1 time in total.
http://www.canfordclassics.co.uk
Porsche Restoration & Sales
Gilbert '71 T
I luv DDK!
Posts: 894
Joined: Sun Oct 03, 2004 9:12 am
Location: N London

Post by Gilbert '71 T »

Another fine job there Alan 8) you have a knack of making these thing look easy :lol:

I agree it's no 5 min job, I got part way through doing one but the quotes I was getting for polishing/re-anodizing or chroming of the strips were more vs. the cost of a good used grill, so my project's been put on hold for now.
Darren
71 911T with C3 motor
Alan @ CanfordClassics
Nurse, I think I need some assistance
Posts: 4206
Joined: Fri Nov 14, 2003 3:10 pm
Location: Bournemouth
Contact:

Post by Alan @ CanfordClassics »

Thanks Darren. :lol:

Alan
http://www.canfordclassics.co.uk
Porsche Restoration & Sales
Mike Usiskin
DDK rules my life!
Posts: 1038
Joined: Fri Sep 30, 2005 12:26 pm
Location: SE London
Contact:

Post by Mike Usiskin »

there you go again :lol: :lol: look you making everyone else look slow :lol:

I'm looking forward to stripping my car under your guidance, I just hope i can keep up your high standards. I fear my learning may not be a curve but more a Himalayan ascent :oops:

PS How are wedding plans :shock:

regards

Mike
former owner, still hoping to be reunited with my STOLEN 1972 911T/E 2.4 . Keep looking guys

No Hydrocarbons were hurt in the sending of this mail. Thanks


#1315
Alan @ CanfordClassics
Nurse, I think I need some assistance
Posts: 4206
Joined: Fri Nov 14, 2003 3:10 pm
Location: Bournemouth
Contact:

Post by Alan @ CanfordClassics »

Hi Mike,

Wedding plans are going well, we have several meetings with caterers today...
....but the bigger question is will I have my 3.2 twin plugged by then as we are going to use it as the wedding car :lol:

Speak soon

Alan
http://www.canfordclassics.co.uk
Porsche Restoration & Sales
210bhp
Nurse, I think I need some assistance
Posts: 8047
Joined: Sat Feb 28, 2004 12:28 am
Location: Scotland

Post by 210bhp »

Alan.UK wrote:Hi Mike,

Wedding plans are going well, we have several meetings with caterers today...
....but the bigger question is will I have my 3.2 twin plugged by then as we are going to use it as the wedding car :lol:

Speak soon

Alan
Check out your insurance very carefully for this Alan. I know someone who came a cropper using their pride and joy as a wedding car. Wouldn't like it to spoil your day.

Regards
Mike
early2.2S
DDK addict
Posts: 146
Joined: Tue Sep 26, 2006 4:50 pm
Location: Poole

Post by early2.2S »

Alan,
Grill looks fab - you must stop doing these restoration threads otherwise you'll have a customer for life.............!!
Regards
Stuart
Helen
Events Organiser
Posts: 5519
Joined: Wed Mar 10, 2004 8:55 pm
Location: Cumbria

Post by Helen »

i have never worked out how to take these apart as all the ones i have had the pleasure of removing and cleaning have been rivetted togeather.

how you do it?
member#1182
Currently Porscheless but on the look out for my 30th
912uk
Nurse, I think I need some assistance
Posts: 5954
Joined: Wed Nov 12, 2003 11:02 pm

Post by 912uk »

bugger it now I have to do another job.. :lol: :lol: :lol:

It's been on my list for a while. I pull part of a spare one apart and straightened it out alot..

Alan your a bad influence on us lot..

I was even out in the workshop today and completed a steering rack ( bar on bit see wanted section ) all stripped cleaned and painted in a day.. what's going on.. I seem to have caught the Alan bug and get this done.. :lol: :lol: :lol: hey not a bad thing..
edwardo
DDK Fanatic
Posts: 50
Joined: Thu Nov 30, 2006 2:29 pm
Location: London

Post by edwardo »

Looks brilliant Alan, Impressive how you got the bars to all lign up correctly.
Helen
Events Organiser
Posts: 5519
Joined: Wed Mar 10, 2004 8:55 pm
Location: Cumbria

Post by Helen »

edwardo wrote:Looks brilliant Alan, Impressive how you got the bars to all lign up correctly.
think this picture answers your question.
Image
and it helps that the bars are numbered.

but i still don't know how to get the grill apart without damaging it then fix it back togeather again.all the ones i have worked on have been rivetted :?
member#1182
Currently Porscheless but on the look out for my 30th
Alan @ CanfordClassics
Nurse, I think I need some assistance
Posts: 4206
Joined: Fri Nov 14, 2003 3:10 pm
Location: Bournemouth
Contact:

Post by Alan @ CanfordClassics »

Hi,

The early SWB grills are different, so maybe that is what you mean, but they can still be taken apart.
The grills are numbered but the polishing process removes these so in this case they were manually identified on where they go.

I also manually adjusted each bar to make them straight and also with the correct curve. To see how badly they were messed up look at the bars at the top of the previous photo. I have a few tricks to achieve this, but the best is patience and time.

Alan
http://www.canfordclassics.co.uk
Porsche Restoration & Sales
johnM
I need to get out more!
Posts: 3391
Joined: Mon Apr 03, 2006 10:27 pm
Location: Lake District

SWB Grill

Post by johnM »

Hi Alan

I am just in the middle of cleaning up a short wheel base grill, what rivets do you use to rebuild the grill, as I can not imagine the original one are still available.

Kind regards
John
1970 2.2E Coupe.
2004 996 GT3 mkII
2015 Skoda Octavia VRS TSI DSG.
2021 Toyota GR Yaris Circuit Pack
Alan @ CanfordClassics
Nurse, I think I need some assistance
Posts: 4206
Joined: Fri Nov 14, 2003 3:10 pm
Location: Bournemouth
Contact:

Post by Alan @ CanfordClassics »

Hi John,

I will need to take a look to remind myself what I use.

Alan
http://www.canfordclassics.co.uk
Porsche Restoration & Sales
nickphillips
DDK above all
Posts: 157
Joined: Sun Jan 25, 2004 8:36 pm
Location: Warrington

Post by nickphillips »

Hi Guys

Thanks for the info, can anyone recommed someone for polishing/anodising them.?? What do you use for straightening the bars, by eye :? :? or jig .

thanks again

nick

p.s. are the rivets 'blind rivets' ???
Post Reply