Meagsquirt EFI on a 2.2T - Real time data view with iPad

[hot66]

looks great

I've been chasing WEGO for a Mac compatible software for their data logger I'm running ... but their answer is always NO . Would be great to link it in to an app like you've done with the MS

[impmad2000]

You can connect the Wego to an MS as an AFR input and use the MS as monitor only. Then you too can have this display . Bit of a waste of a Megasquirt ECU though !!

[PhilD]

Hi Tim,

Any news on your spec you suggested you were putting together in your Feb post? I'm looking to rebuild my 2.7S (CSI) and change to Megasquirt.

Guess the Triumph T595/T955 manifolds would be more than adequate so looking for some now. Would be ideal if you could give the basic building blocks so I can start gathering the necessary collection of bits!

Great work by the way, I look forward to rebuilding mine!!

Thanks in anticipation

Cheers

Phil

[TheEasyLife]

Phil, I'll drop you a pm later today. Plans are afoot.

Cheers

James.

[PhilD]

Cheers - looking forward!

[TheEasyLife]

Took mine out for fuel in anticipation of a drive with my dad tomorrow. Remembered I now have real time data. On the drive, when i got back home. So here's the pic anyway.



Installation was truly plug and play as follows:
1: plug the dongle into the serial port on Megasquirt,
2: turned wifi on on iPhone, selected the obvious wifi access point,
3: opened up MobiSquirt then it instantly connected and was displaying the above.

Many thanks Tim.

Cheers

James

Ps this was on iphone5 as I only got my old 3G back from the missus last night.