Page 3 of 3

Re: Spare junk M-caliper long bolts/nuts anybody?

Posted: Tue Dec 19, 2023 7:36 pm
by rhd racer
I am in East Notts if it helps. Happy for you to borrow mine as long as it’s not for too long - pre season checks can spring surprises! PM me if it helps, cheers, Wayne


Sent from my iPhone using Tapatalk

Re: Spare junk M-caliper long bolts/nuts anybody?

Posted: Tue Dec 19, 2023 8:07 pm
by 911hillclimber
Delano, are you in Telford ish area?
I have a good bleeder with one way valves.
Fill the reservoir, put the bleeder on the open nipple ( about a 1.5 turn) and get in the car.
Gently pump the pedal and fluid is expelled and nipple closed off as you let the pedal up, repeat and some more.
Clear tubes allow you to see if bubbles are in the fluid.

Works a treat but not as good as my wife!

You are welcome to pop over and borrow it, not my wife….. :lol:
Have used it on my 911 and Lola.
Pm me if interested.

Re: Spare junk M-caliper long bolts/nuts anybody?

Posted: Tue Dec 19, 2023 8:50 pm
by sladey
rhd racer wrote:I am in East Notts if it helps. Happy for you to borrow mine as long as it’s not for too long - pre season checks can spring surprises! PM me if it helps, cheers, Wayne


Sent from my iPhone using Tapatalk
I’m also in east Notts - Epperstone - where are you?

Re: Spare junk M-caliper long bolts/nuts anybody?

Posted: Tue Dec 19, 2023 10:58 pm
by rhd racer
If you shout in an easterly wind I might hear you! Well, nearly…


Sent from my iPhone using Tapatalk

Re: Spare junk M-caliper long bolts/nuts anybody?

Posted: Wed Dec 20, 2023 10:09 am
by jb
Dean this might amuse you and possibly help when you come to bleed the brakes if only to avoid some of the mistakes I made.
viewtopic.php?t=66119&hilit=bleed

Re: Spare junk M-caliper long bolts/nuts anybody?

Posted: Thu Dec 21, 2023 10:34 am
by deano
Thanks everyone for the kind offers! I'll get everything fitted some time after Xmas and take stock from that point, but most likely end up buying the knock off Sealey bleeder look-alike....

:cheers: