Work done on my 911 by RS 911
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
domtoni
- DDK forever
- Posts: 704
- Joined: Sat Feb 26, 2005 2:38 pm
- Location: kinver staffs
-
Matt black70
- DDK forever
- Posts: 511
- Joined: Fri Aug 04, 2006 9:40 pm
- Location: Wolverhampton
-
domtoni
- DDK forever
- Posts: 704
- Joined: Sat Feb 26, 2005 2:38 pm
- Location: kinver staffs
- Bootsy
- Site admin and the Boss
- Posts: 25590
- Joined: Sat Nov 08, 2003 6:09 pm
- Location: Norwich
- Contact:
I was chatting to Mark at Castle Hedingham about your car. Be great to see some more pictures.
1972 911T | 1994 993 Carrera | 1999 986 Boxster |
Vintage Heuer, Omega, Zenith and other vintage watches - http://www.heuerheritage.co.uk
Vintage Heuer, Omega, Zenith and other vintage watches - http://www.heuerheritage.co.uk
-
domtoni
- DDK forever
- Posts: 704
- Joined: Sat Feb 26, 2005 2:38 pm
- Location: kinver staffs
Thanks Bootsy,
I hoped to be there, but circumstances beyond my control prevented me.
From the original quote, Mark changed how he progressed the car. The wings have never been off the car. I am sure he told you alot more.
Best
Dom
I hoped to be there, but circumstances beyond my control prevented me.
From the original quote, Mark changed how he progressed the car. The wings have never been off the car. I am sure he told you alot more.
Best
Dom
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
-
domtoni
- DDK forever
- Posts: 704
- Joined: Sat Feb 26, 2005 2:38 pm
- Location: kinver staffs
Latest Photos
[url]
[/img

[/img]

[/img]
[/img
[/img]


[/img]

domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
-
Lightweight_911
- Nurse, I think I need some assistance
- Posts: 17946
- Joined: Wed Nov 12, 2003 10:48 pm
- Location: Worcs/W Mids border
-
domtoni
- DDK forever
- Posts: 704
- Joined: Sat Feb 26, 2005 2:38 pm
- Location: kinver staffs
Car is finally home !!!
Picked it up last friday.
Mark did a great job, and was fair with all he did. I could not have asked for more.
I will post a few new pictures once I get around to it.
Car is registered for the sunday Concours at Silverstone.
Best
Dom
Picked it up last friday.
Mark did a great job, and was fair with all he did. I could not have asked for more.
I will post a few new pictures once I get around to it.
Car is registered for the sunday Concours at Silverstone.
Best
Dom
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
-
domtoni
- DDK forever
- Posts: 704
- Joined: Sat Feb 26, 2005 2:38 pm
- Location: kinver staffs
Two Photos from the Silverstone Concours
Well gang, I tried and thought I could win a prize yesterday. Boy was I wrong.
Anyway, here is the finished car !!!!
Dom
[/img]
[/img]
Anyway, here is the finished car !!!!
Dom
[/img][/img]

domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
-
left4dead
- Nurse, I think I need some assistance
- Posts: 5135
- Joined: Sat May 05, 2007 8:53 pm
- Location: Horse country (Surrey).
Re: Two Photos from the Silverstone Concours
You didn't win? What the hell is wrong with those guys?!!!domtoni wrote:Well gang, I tried and thought I could win a prize yesterday. Boy was I wrong.
Anyway, here is the finished car !!!!
Dom
What were you marked down on (and, out of interest, what were you beaten by?)
Your car looks superb, btw
Steve
1 x '67S, 3 x 2.4S all RHD
A privilege & pleasure to have owned them all.
1 x '67S, 3 x 2.4S all RHD
A privilege & pleasure to have owned them all.
-
domtoni
- DDK forever
- Posts: 704
- Joined: Sat Feb 26, 2005 2:38 pm
- Location: kinver staffs
I know this much:
- the steering wheel is not straight - probably straightened out this week when the car gets aligned
- the wheel crest should point to the valve stem - it didn't
- no service book was in the glove box - but some old parts were
- I left an old parking sticker in the car
- Plenty of dust was found in the door boxes
- there was probably some dust around the wheel nuts
The Porsche club will give me their evaluation later this week.
So much for Concours !!!!
Lots of BS involved with it.
Best
Dom
- the steering wheel is not straight - probably straightened out this week when the car gets aligned
- the wheel crest should point to the valve stem - it didn't
- no service book was in the glove box - but some old parts were
- I left an old parking sticker in the car
- Plenty of dust was found in the door boxes
- there was probably some dust around the wheel nuts
The Porsche club will give me their evaluation later this week.
So much for Concours !!!!
Lots of BS involved with it.
Best
Dom
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars




[/img]