FS:911/914 parts - DO NOT REPLY TO THIS THREAD

[amallagh]

Following part now added to the original list:
Set of 6 PMO 50mm carburettor velocity stacks £50.

Following part now sold and removed from the original list:-
993 n/s Brembo rear caliper. Genuine new part. Part No 993.352.421.00

[amallagh]

Following parts now sold and removed from the original list:-
964 KW stainless steel body, Variant 3, compression & rebound adjustable front strut set. Very little use indeed and in as new condition. £275 for pair. (>£1600RRP for full car kit)
914 engine tin piece. No significant rust but would need painting. £17.50

[amallagh]

Following part now sold and removed from the original list -
911 PMO carburettor 50mm velocity stack set of 6 £40. (52.5mm inner diameter)

Following parts added to the original list for sale -
SWB 911 rear right light unit. Lense with no cracks and still has vibrant colour. Chrome body is very good, just some corrosion on internal reflectors behind the bulbs. About as good as they come. £189.
964 rear spoiler raise/lower motor & gearbox. Part No.964.624.111.00 Motor (£264 new) & 964.624.121.00 Gearbox (£259 new). These items regularly fail and hard to find second hand in good condition. This set is used but in good working order. £249 for the pair. (May split if required).
911 gearbox mount. 1974 onwards. Blasted and powder coated. Ready to fit and like new. £55
SWB 911 Bosch headlight lens. NLA. This is the now very rare sloping top type used on all early cars rather than the later stepped top type used on later cars up to '89. £79

[amallagh]

Following part added to original list
911 '68-76' brake mastercylinder switch for use on std Ate 19mm dual circuit mastercylinder with it mounted on the side. Single pole switch type with plunger. Genuine new Ate branded switch. £12.50
(See picture on first post)

[rhd racer]

Hi Andrew

I will take the following please, assuming it is the item photographed that matches the engine cowl you have for sale (ie not the later one with the rectangular ridge on it's back and a grey cowl in replacement to the one I am after)

911 tinware deflector piece to divert air into std engine oil cooler for early engines. Stripped and powder coated. £17.50

If that makes sense!

Cheers
Wayne

Drop me a pm with your bank details and postage cost

[amallagh]

No problem Wayne,
could I be a pain and ask you to do this off my 'new' sales post. I'm trying to close this thread off as it is too long.
Your reply has shot it to the top of the thread list again and crucially above my 'new' sales post.


TO ALL AND SUNDRY,
PLEASE DONT REPLY TO THIS THREAD. ANYTHING STILL FOR SALE HAS BEEN TRANSFERRED TO A NEW THREAD AS THIS ONE WAS HETTING TOO LONG.
THANKYOU

[JoakimB]

Hello Andrew,

"SWB 911 rear right light unit. Lense with no cracks and still has vibrant colour. Chrome body is very good, just some corrosion on internal reflectors behind the bulbs. About as good as they come. £189"

Is there a picture available?

Thanks
Jocke

[amallagh]

Hello Jocke, you may not have noticed that this post dates back to October 2012. I'll send you a PM with a link.
Regards
Andrew

Hello Andrew,

"SWB 911 rear right light unit. Lense with no cracks and still has vibrant colour. Chrome body is very good, just some corrosion on internal reflectors behind the bulbs. About as good as they come. £189"

Is there a picture available?

Thanks
Jocke

[amallagh]

DO NOT REPLY TO THIS OLD SALES POST