Page 13 of 20
Posted: Fri Dec 17, 2010 11:57 pm
by amallagh
Following parts now sold and removed from original list
SWB 911 Bosch headlight lenses. NLA flat profile lenses. £95
Engine bay seal
Posted: Sun Dec 26, 2010 9:58 pm
by andrew911s
Hi, I am interested in the engine bay seal, how much would the postage be to Stourbridge UK? Thanks Andrew
Re: Engine bay seal
Posted: Wed Dec 29, 2010 6:14 pm
by amallagh
andrew911s wrote:Hi, I am interested in the engine bay seal, how much would the postage be to Stourbridge UK? Thanks Andrew
PM sent
Posted: Mon Feb 14, 2011 1:01 am
by amallagh
Some parts added to original list with pictures at start of this thread:-
911 pair of 3 bearing cam carriers with upper and lover valve covers. 901.105.111.0R. £95
911 Bosch 12v 0.8PS starter motor. 001212005 £50
911R rear bumper for SWB. Made by GT Racing in the US.
http://www.gt-racing.com./pdfs/GTR911R.pdf ($495 new). Both ends have been cleanly cut off. Could easily be bonded back on or bumper could be shortened to use on LWB. £100.
911 early style fan housing 901.106.101.5R £95
914 Bosch 12v 0.8PS starter motor. 001212002 £45
Posted: Tue Feb 15, 2011 12:43 pm
by haasad
Hi , I cannot see pictures at work due to the firewall. Do the harnesses have an "aircraft style rotary buckle" or a traditional tongue and reciever?
andy
Posted: Tue Feb 15, 2011 1:50 pm
by amallagh
haasad wrote:Hi , I cannot see pictures at work due to the firewall. Do the harnesses have an "aircraft style rotary buckle" or a traditional tongue and reciever?
andy
hi andy
they are tongue and receiver. Really need to see the pictures when you have the chance
Andrew
Posted: Thu Feb 17, 2011 2:02 am
by amallagh
Following parts now sold and removed from list -
914 Weltmeister polygraphite trailing arm rear bushings
914 brake bleed nipples
Posted: Fri Feb 18, 2011 12:40 am
by amallagh
Following parts now sold and removed from the original post list :-
Used Facet Red Top Fuel Pump. Came off working car and tested with pressure gauge to make sure it provides full pressure but can't vouch for how much use it has had hence price. Ideal as running spare - £12.50
Filter King fuel filter / pressure regulator FPR006 85mm - new glass bowl & high flow filter element £37.50
'65-'68 SWB 911/912 brake hose set. Used but were only fitted for a short time and is decent usable condition. Absolutely no corrosion on the steel end fittings. £17.50 for set of 4
Posted: Mon Feb 21, 2011 10:20 am
by amallagh
Following parts now sold and removed from the original list -
911 new engine bay seals. Full set (front piece and side/rear piece) £59
Fine ribbed 911 rubber mat set with leather ties for footboard as fitted to original M471 Carrera RS Sport. New - £115
911/912 early style 15mm front anti roll bar. Just been powder coated and incudes new SuperPro Polyurethane bushings. Ready to fit. £125. Also have set of lever arms and drop links in good condition with useable rubber bushings if you need them. (Missing a couple of the rectangular clamping washers that are used to secure the lever arms to the bar) £89.
911/912 early style 15mm rear anti roll bar. Bit worn around the bush mounting points but useable after a blast and powder coat. £35.
Posted: Thu Feb 24, 2011 11:14 pm
by amallagh
Following parts now added to original list (see pictures on first post) -
911 right side timing cover (901.105.106.1R) and matching timing case (901.105.102.1R). All good condition £55
911 pair of 3 bearing cam carriers with upper and lover valve covers. 901.105.111.0R. £95
911S(RS?) MFI alloy velocity stacks (9011103090R). 38mm exit diameter. Comes with inlet buckets in great condition with all clips, seals, etc. £135
911S(RS?) MFI throttle bodies (9011101010R & 9111101010R). 38mm inlet, 36mm outlet. All intact, no damage, tight shafts, complete with all studs/sdjusting screws & levers. Needs a good clean. £160
911 MFI throttle shaft. £30
(If someone wants the stacks, throttles & shaft then I will sell all 3 together for £275)
911 Bosch spark box (022730000). 6 pin. Was told it came out of a working engine but haven't got a way of testing it myself. £100
Following parts now sold and removed from original list:-
911/912 steel wheel center caps with Porsche crest. 3 off. Good overall condition, remarkably rust free, some minor surface marks that could easily be polished out if you wanted to make them perfect. Very nice as they are though. £49 for set of 3
Pair of black 3 point LUKE harnesses. Condition like new. £ 50
1974-1977 911S cams in good condition - £85
Posted: Thu Feb 24, 2011 11:28 pm
by brembo
Hi Andrew,will take the 6 pin spark box, if working.Is there any way you could have it tested.
Regards,
Posted: Thu Feb 24, 2011 11:52 pm
by amallagh
brembo wrote:Hi Andrew,will take the 6 pin spark box, if working.Is there any way you could have it tested.
Regards,
Hi Dougie,
I don't have a 6 pin set up to plug it into to test. To be honest if I knew for sure it worked I'd probably have asked a bit more for it. I bought it with some other parts I've used, off a guy who said he thought it worked but that is 2nd hand info only.
If you would still want it if it didn't work(i.e so you could get it repaired) then how about this or size.
I guess a fully working one is worth about £150.
Assuming you have a car to test it on you could have it for £140 including postage. If you find on testing it that it doesn't work then I'll refund you £65 so it would have cost you £75 and someone like Tim could repair it for you. OR you could run the risk yourself and have it for £100 as stated.
Sound any good ?
Posted: Fri Feb 25, 2011 8:15 pm
by amallagh
Bit the bullet today and took the spark box to a local Porsche specialist and tried it in an SC. Worked perfectly. £150. Wording modified on listing in indicated it is in working order. (£140 to you Dougie as I already offered you that !)
Posted: Fri Feb 25, 2011 9:17 pm
by brembo
Andrew,you have pm.
Regards,
Posted: Fri Feb 25, 2011 9:59 pm
by amallagh
6 pin CDi box sold pending payment.
Thanks Dougie