That will do fine!
Mine were just like that, did them years ago and sill ok.
Opinions on possible repair please
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
911hillclimber
- Nurse, I think I need some assistance
- Posts: 20612
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Re: Opinions on possible repair please
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
-
Loz
- DDK slapper chatter
- Posts: 443
- Joined: Wed Oct 24, 2012 11:28 pm
- Location: Kent
Re: Opinions on possible repair please
Ok so here it is. Not sure if I'll try and find something brighter silver paint.
On the whole, I'm happy. Another original part saved.
Sent from my Pixel 4a using Tapatalk
On the whole, I'm happy. Another original part saved.
Sent from my Pixel 4a using Tapatalk
1970 911t Coupe 2626
"I've started so I'll finish"
"I've started so I'll finish"
-
Lightweight_911
- Nurse, I think I need some assistance
- Posts: 17942
- Joined: Wed Nov 12, 2003 10:48 pm
- Location: Worcs/W Mids border
Re: Opinions on possible repair please
.
Looks pretty good to me !
.
Looks pretty good to me !
.
Andy
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
-
Loz
- DDK slapper chatter
- Posts: 443
- Joined: Wed Oct 24, 2012 11:28 pm
- Location: Kent
Re: Opinions on possible repair please
Thanks Andy
1970 911t Coupe 2626
"I've started so I'll finish"
"I've started so I'll finish"
-
Gary71
- Nurse, I think I need some assistance
- Posts: 10689
- Joined: Wed Mar 31, 2004 1:27 pm
- Location: Cheshire
- Contact:
Re: Opinions on possible repair please
Fine job. Repairing these is a ball ache! 
-
Loz
- DDK slapper chatter
- Posts: 443
- Joined: Wed Oct 24, 2012 11:28 pm
- Location: Kent
Re: Opinions on possible repair please
Cheers Gary. Wasn't too bad really just shaping a few small pieces of Ali. JB Weld held the main piece in place and then the fibre fill brought some of the shape back. It's fairly strong so hopefully all will be well.
If anyone can recommend a supplier of decent lenses...much appreciated.
1970 911t Coupe 2626
"I've started so I'll finish"
"I've started so I'll finish"