Page 2 of 2
Re: 914 not starting when hot?
Posted: Fri Jul 23, 2021 6:43 pm
by neilbardsley
I have already exchanged messages with him. No stock
Sent from my M2004J19C using Tapatalk
Re: 914 not starting when hot?
Posted: Fri Jul 23, 2021 9:06 pm
by Nine One One
Dellorto DRLA’s have the same footprint as Weber so try these??
https://www.ebay.co.uk/itm/Weber-IDF-De ... boEALw_wcB
Or search for something similar
Re: 914 not starting when hot?
Posted: Fri Jul 23, 2021 10:30 pm
by rhd racer
Can you get 40s (or smaller) and make a jig out of wood, pilot hole dead centre and open them up with a hole saw?
Re: 914 not starting when hot?
Posted: Sat Jul 24, 2021 12:55 pm
by neilbardsley
He did offer me some 38mm. I initially said no but am now trying to buy them
Sent from my M2004J19C using Tapatalk
Re: 914 not starting when hot?
Posted: Mon Jul 26, 2021 9:37 am
by neilbardsley
Bought them. I have also ordered an appropriate 44mm saw drill. If my brother in law will not let me use this overhead drill I might be asking for a favour from the DDK family
Sent from my M2004J19C using Tapatalk