Page 10 of 24
Re: "Le Belgique" ST build.
Posted: Wed Oct 05, 2016 11:29 pm
by DustyM
stretch wrote:Thanks for the nice comments.
Jon, the painter is trying to convince me to put a very fine coat of what he calls "bagseal" on the underside of the arches.
Listen to him, and do the underside of the floorpan while you're at it!
Re: "Le Belgique" ST build.
Posted: Wed Oct 05, 2016 11:56 pm
by Darren65
DustyM wrote:stretch wrote:Thanks for the nice comments.
Jon, the painter is trying to convince me to put a very fine coat of what he calls "bagseal" on the underside of the arches.
Listen to him, and do the underside of the floorpan while you're at it!
Maybe fit some heated seats as well!
Great progress Dave

Re: "Le Belgique" ST build.
Posted: Thu Oct 06, 2016 12:17 pm
by shoestring7
Lovely work Dave. Thought about painting it in a different colour though?
>C
Re: "Le Belgique" ST build.
Posted: Thu Oct 06, 2016 1:10 pm
by stretch
No chance Charles. I have always wanted another Yellow 911.
I see you have finally started a thread on your car. I will chime in when i get to the new episodes.

Peter James is not the only good writer on the South coast then.

Re: "Le Belgique" ST build.
Posted: Fri Oct 07, 2016 1:24 pm
by lamakdaddy
stretch wrote:Thanks for the nice comments.
Jon, the painter is trying to convince me to put a very fine coat of what he calls "bagseal" on the underside of the arches.
[/quote]
What is bagseal please?
Re: "Le Belgique" ST build.
Posted: Fri Oct 07, 2016 3:02 pm
by inaglasshouse
Hi Dave, your car is looking fantastic. Well done.
lamakdaddy wrote:
What is bagseal please?
Possibly 3M underseal 08800. So-called because it comes in ... a bag.
Re: "Le Belgique" ST build.
Posted: Fri Oct 07, 2016 8:35 pm
by stretch
Hi Richard. Thanks.

I think that's what Northern folk call the 3M stuff.
Good to see you are up and running on your build. Enjoy, i will look forward to regular updates.
Dave
Re: "Le Belgique" ST build.
Posted: Sun Feb 12, 2017 10:27 am
by stretch
A long overdue update.
Very excited to finally see some top coats of paint applied to the shell. The brief to the painter was to seam seal to the minimum, wipe in, wipe out to give that clean look i am looking for.
Several attempts have been made to choose a Black that has the right sheen. Very happy with the final choice. I chose to fully paint the Black inside the cabin as the paper thin lightweight carpet is very transparent and we don't want the Yellow glaring through the carpet.
No sound deadening in this one....!
The undercoat. There is much evidence on the the factory undercoats used on the Yellows and the period safety colours. White was chosen to get the Yellow to sing.
The Yellow: I had already decided the final coat would be paint code 117 Light yellow . Finding a suitable shade and formula was another matter. After much research and spray outs, i asked my painter to paint inside the front trunk with the nominated Yellow to confirm i was happy with my choice. Thanks to Philip and Darren on the paint choice journey.
That just about brings the paintwork upto date. Hope to get the shell back home in the near future.
Although i have 99% of the parts in place to build this car, one detail was yet to be implemented.
Research and a magazine article on the original Gaban ST confirmed that the car used 4mm plexiglas windows. I had always planned to use plexi for all the side windows but wanted them to have the correct logo markings.
Fellow DDK member Chris Jury had trodden the path previously and had produced a heat stamp and the Artwork file.
With file borrowed, i gave fellow DDK'r Kirk the task of finding a way to laser etch the logo onto the glass.
Sample looks as good as it gets. Big thanks To Chris Jury and Kirk for making this bit happen.
More exciting news was the prompt from the engine builder to travel to his premises with all parts so the assembly of the engine could commence. Getting there.....slowly.
Dave
Re: "Le Belgique" ST build.
Posted: Sun Feb 12, 2017 10:42 am
by Lightweight_911
Great update Dave - the shell looks fabulous !
I love this interior shot:

Re: "Le Belgique" ST build.
Posted: Sun Feb 12, 2017 10:56 am
by mrg3.6
Fantastic job Dave,
After nearly 8 years I've finally returned to UK (from Singapore) so hopefully we can introduce our respective ST 'builds' to each other in the summer.
Cheers
Martin Gibson
Re: "Le Belgique" ST build.
Posted: Sun Feb 12, 2017 11:45 am
by MarkIII
Coming along Dave, love your colour choice, looking forward to your next update and seeing the full shell painted
Re: "Le Belgique" ST build.
Posted: Sun Feb 12, 2017 11:50 am
by inaglasshouse
Looking fabulous Dave. You must be really pleased!
Let me know what that black paint is, when you have a moment, please.
Cheers, Richard.
Re: "Le Belgique" ST build.
Posted: Sun Feb 12, 2017 3:24 pm
by Darren65
stretch wrote:......No sound deadening in this one....!....
Brave boy!

..... glad you resisted applying underseal too.
I've been itching to see the car in paint and have to say it doesn't disappoint......the shell is looking absolutely stunning!
What paint did you opt for in the end?
Home stretch now!
Cheers,
Re: "Le Belgique" ST build.
Posted: Sun Feb 12, 2017 3:54 pm
by KS
Fantastic work. Real magazine quality stuff!

Re: "Le Belgique" ST build.
Posted: Sun Feb 12, 2017 4:28 pm
by jtparr
Superb..!