Back in beige

Ongoing and archived Porsche (and other marques) restoration threads from DDK members

Moderator: Bootsy

Post Reply
sladey
Nurse, I think I need some assistance
Posts: 9315
Joined: Sat Apr 23, 2005 9:08 pm
Location: Nottingham, UK

Re: Back in beige

Post by sladey »

And on the Windows I paid a local glass people to take them both out (front and rear) - store then for a couple of months and refit them. I think I paid £150
The simple things you see are all complicated
I look pretty young but I'm just backdated yeah
jtparr
DDK 1st, 2nd and 3rd for me!
Posts: 2356
Joined: Mon May 24, 2004 10:54 pm
Location: london/surrey

Re: Back in beige

Post by jtparr »

Jamie
Before you spend more time removing the screen...I think you will find that all new seals available are now the later type...ie from 964 style or some such other latter era.....and thereby wider than the early cars...I began to notice this looking at original cars only after I replaced mine 8 years ago.....have just looked at mine and yes it is slightly recessed......so I don't know that official seals will install any better....suggest you talk to some of the restorers around the forum...maybe Alan who would use a lot of them......mine hasn't leaked in the intervening time.....so it's tempting to suggest you leave it well alone and edge one step closer to driving it...:)
Jonathan
1974 2.7 Carrera
(full restoration. now as an RS Touring)
1963 3.8 E Type
( 11 years in the making…………………….)
1952. XK120…the next one ……….……..)
jamie
Me and DDK sitting in a tree! KISSING
Posts: 2587
Joined: Mon Sep 18, 2006 12:23 am
Location: Palm Springs, California
Contact:

Re: Back in beige

Post by jamie »

Hi Jonathan. Thanks for this, but I couldn't leave it, so this morning I ordered another one, £80 delivered, from the classic-friendly parts dept at OPC Glasgow.

For the sake of 80 quid, I want it to be right. But I fear that you may be right about it being a poor fit...
'68 912
jtparr
DDK 1st, 2nd and 3rd for me!
Posts: 2356
Joined: Mon May 24, 2004 10:54 pm
Location: london/surrey

Re: Back in beige

Post by jtparr »

Hope not, much prefer me to be wrong..!
1974 2.7 Carrera
(full restoration. now as an RS Touring)
1963 3.8 E Type
( 11 years in the making…………………….)
1952. XK120…the next one ……….……..)
DustyM
I need to get out more!
Posts: 3198
Joined: Tue Apr 21, 2009 4:12 pm
Location: Middle England

Re: Back in beige

Post by DustyM »

Don't forget to adjust the chrome trims to shape the rubber, this will make quite a difference to how the rubber fits particularly in the corners.
Uk911
DDK forever
Posts: 576
Joined: Mon Aug 06, 2012 8:27 pm
Location: Barrow in Furness

Re: Back in beige

Post by Uk911 »

DustyM wrote:Don't forget to adjust the chrome trims to shape the rubber, this will make quite a difference to how the rubber fits particularly in the corners.
Jon,

I'm about to refit my frt and rear screen with new Porsche rubbers and trims the trims I bought are already pre bent to a shape can you expand on above or any pics of the reshaping to get a better fit, thanks in advance ...

Mark...
72 Marmite Panzer.
911hillclimber
Nurse, I think I need some assistance
Posts: 20612
Joined: Mon Mar 10, 2008 6:26 pm
Location: West Midlands

Re: Back in beige

Post by 911hillclimber »

IIRC the corner rads are a compound radius front and rear screen and can complicate the 'fight' into position...

ie they are radius'd in 2 planes.
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
DustyM
I need to get out more!
Posts: 3198
Joined: Tue Apr 21, 2009 4:12 pm
Location: Middle England

Re: Back in beige

Post by DustyM »

Uk911 wrote:
DustyM wrote:Don't forget to adjust the chrome trims to shape the rubber, this will make quite a difference to how the rubber fits particularly in the corners.
Jon,

I'm about to refit my frt and rear screen with new Porsche rubbers and trims the trims I bought are already pre bent to a shape can you expand on above or any pics of the reshaping to get a better fit, thanks in advance ...

Mark...
72 Marmite Panzer.
Once you have the screen fitted the corners may not sit as tight into the frame as you would like so with a piece of wood or similar you can nudge the chrome trim outwards into the corner it will take the rubber with it and stop the rubber curling into the frame or leaving a gap.
Uk911
DDK forever
Posts: 576
Joined: Mon Aug 06, 2012 8:27 pm
Location: Barrow in Furness

Re: Back in beige

Post by Uk911 »

DustyM wrote:
Uk911 wrote:
DustyM wrote:Don't forget to adjust the chrome trims to shape the rubber, this will make quite a difference to how the rubber fits particularly in the corners.
Jon,

I'm about to refit my frt and rear screen with new Porsche rubbers and trims the trims I bought are already pre bent to a shape can you expand on above or any pics of the reshaping to get a better fit, thanks in advance ...

Mark...
72 Marmite Panzer.
Once you have the screen fitted the corners may not sit as tight into the frame as you would like so with a piece of wood or similar you can nudge the chrome trim outwards into the corner it will take the rubber with it and stop the rubber curling into the frame or leaving a gap.
Cheers Jon very helpful thank you.....Mark
jamie
Me and DDK sitting in a tree! KISSING
Posts: 2587
Joined: Mon Sep 18, 2006 12:23 am
Location: Palm Springs, California
Contact:

Re: Back in beige

Post by jamie »

DustyM wrote:Once you have the screen fitted the corners may not sit as tight into the frame as you would like so with a piece of wood or similar you can nudge the chrome trim outwards into the corner it will take the rubber with it and stop the rubber curling into the frame or leaving a gap.
Hmm...
'68 912
jamie
Me and DDK sitting in a tree! KISSING
Posts: 2587
Joined: Mon Sep 18, 2006 12:23 am
Location: Palm Springs, California
Contact:

Re: Back in beige

Post by jamie »

sladey wrote:
jamie wrote:912 shoutout by Mark Radcliffe on BBC 6 Music today: https://clyp.it/1kaalbku
I heard that Jamie - was it you that sent in the photo to him then?
It was. First my friend Colin, a journalist, emailed in about the aeroplane (a Vans RV-7) he had built in his shed. Then my friend Jels (the guy, mentioned a few times in this thread, who owns the workshop in which my 912 lived for a while when it first arrived in the UK) emailed-in about the Sprinter campervan he was building in his shed (workshop). Jels and Colin sort of know each other through me. So I sent an explanation, and a picture of the 912. Turns out Mark Radcliffe likes an old Porsche, even if he didn't know.

Was quite good fun.
'68 912
jamie
Me and DDK sitting in a tree! KISSING
Posts: 2587
Joined: Mon Sep 18, 2006 12:23 am
Location: Palm Springs, California
Contact:

Re: Back in beige

Post by jamie »

I could cry (but instead I've just gone silent with rage).

Two hours installing the windscreen. Cleaned the excess sealant off. Was almost done and looking excellent when I decided to give it a nudge towards the driver's side, and BAM... I cracked it.

Anyone know the absolute cheapest place to get a new windscreen?
'68 912
User avatar
Darren65
Nurse, I think I need some assistance
Posts: 8161
Joined: Mon Dec 13, 2010 10:55 pm
Location: North Wiltshire
Contact:

Re: Back in beige

Post by Darren65 »

Bummer :(

Ricky Evans Motorsport £170 + VAT....not sure if there's cheaper out there?

http://www.heatedwindscreen.com/acatalog/PORSCHE.html
DustyM
I need to get out more!
Posts: 3198
Joined: Tue Apr 21, 2009 4:12 pm
Location: Middle England

Re: Back in beige

Post by DustyM »

jamie wrote:I could cry (but instead I've just gone silent with rage).

Two hours installing the windscreen. Cleaned the excess sealant off. Was almost done and looking excellent when I decided to give it a nudge towards the driver's side, and BAM... I cracked it.

Anyone know the absolute cheapest place to get a new windscreen?
Been there, got the T-Shirt!

Give these guys a call - http://www.uroglas.com
sladey
Nurse, I think I need some assistance
Posts: 9315
Joined: Sat Apr 23, 2005 9:08 pm
Location: Nottingham, UK

Re: Back in beige

Post by sladey »

jamie wrote:
sladey wrote:
jamie wrote:912 shoutout by Mark Radcliffe on BBC 6 Music today: https://clyp.it/1kaalbku
I heard that Jamie - was it you that sent in the photo to him then?
It was. First my friend Colin, a journalist, emailed in about the aeroplane (a Vans RV-7) he had built in his shed. Then my friend Jels (the guy, mentioned a few times in this thread, who owns the workshop in which my 912 lived for a while when it first arrived in the UK) emailed-in about the Sprinter campervan he was building in his shed (workshop). Jels and Colin sort of know each other through me. So I sent an explanation, and a picture of the 912. Turns out Mark Radcliffe likes an old Porsche, even if he didn't know.

Was quite good fun.
I've always liked their show but it never managed to fit in with my life. Most recently I've started using the iPhone radio app and I listen to their afternoon show whenever I'm in the car - great stuff

It was nice that he admittedly knows nothing about cars but instantly got what they are all about - 'before they got all "showey offey" - just kinda cool' - nailed it
The simple things you see are all complicated
I look pretty young but I'm just backdated yeah
Post Reply