914 2.0 crankcase anyone?
Moderator: Miggs
-
- I luv DDK!
- Posts: 894
- Joined: Sun Oct 03, 2004 9:12 am
- Location: N London
914 2.0 crankcase anyone?
this is a longshot
anyone have a good 914 2.0 case going, would prefer non align bored but i guess either .25 or .50 will be ok.
or if anyone knows where I could get bearings in STD crank .40 Case but that's an even longer shot I bet
Thanks all
anyone have a good 914 2.0 case going, would prefer non align bored but i guess either .25 or .50 will be ok.
or if anyone knows where I could get bearings in STD crank .40 Case but that's an even longer shot I bet
Thanks all
Darren
71 911T with C3 motor
71 911T with C3 motor
-
- I luv DDK!
- Posts: 894
- Joined: Sun Oct 03, 2004 9:12 am
- Location: N London
Hi Pablo,
Was hopefully after a 2.0 case to replace what came in my car (GA align bored for 040 mains & I have no hope of finding those bearings).
Actually now you mention it is there any reason I couldnt use 1.7/1.8 (EA/B/C, W or AN) to build a 2056 with my 71mm crank. do the earlier cases need machining for the bigger pistons?
Was hopefully after a 2.0 case to replace what came in my car (GA align bored for 040 mains & I have no hope of finding those bearings).
Actually now you mention it is there any reason I couldnt use 1.7/1.8 (EA/B/C, W or AN) to build a 2056 with my 71mm crank. do the earlier cases need machining for the bigger pistons?
Darren
71 911T with C3 motor
71 911T with C3 motor
www.904GTS.com
www.technic-motorsport.com
Factory built Safari 2.7 RS
Too many projects not enough time !
www.technic-motorsport.com
Factory built Safari 2.7 RS
Too many projects not enough time !
-
- I luv DDK!
- Posts: 894
- Joined: Sun Oct 03, 2004 9:12 am
- Location: N London
They will be stripped yes all bar the studs, but I just thought, I had better make sure they are 914 cases, not Type 4 as they differ in the oil filler & dipstick areas.
Ad`s offer is good, sounds defo like a 914 case and he is way closer to you.
Let me know when you go down your route and I will have a dig about in the shed.
Ad`s offer is good, sounds defo like a 914 case and he is way closer to you.
Let me know when you go down your route and I will have a dig about in the shed.
Darren
Dunno if your still after one, but check this link out
http://www.volkszone.com/VZi/showthread.php?t=320762
good luck
Dunno if your still after one, but check this link out
http://www.volkszone.com/VZi/showthread.php?t=320762
good luck
-
- I luv DDK!
- Posts: 894
- Joined: Sun Oct 03, 2004 9:12 am
- Location: N London
-
- DDK Newbie
- Posts: 3
- Joined: Sat Oct 21, 2006 2:28 pm
- Location: Little Rock, Arkansas U.S.A.
GA and GB Crankcases, 71mm liter cranks
Hello everyone,
I didn't see this string until today. Just wanted to let you all know I have a collection of Porsche 914 items for sale. Three GA and one GB 2.0 liter crankcases. Each has been cleaned, inspected and determined to be in very good condition and never align bored.
One 914 GA engine, missing cylinders and fuel injection system.
One 914 GA engine complete with fuel injection. Good running motor.
One 914 1.8 engine complete with fuel injection. Good running motor.
One 914 1.8 engine complete with fuel injection. Good running motor.
I have a friend who regularly ships containers to Belgium and Italy and could easily include engines and transmissions in these shipments.
Let me know if you have any interest.
Cheers,
Henry
1956 356 Coupe
1970 911T Coupe
1973 914-4 2.0 Roadster
I didn't see this string until today. Just wanted to let you all know I have a collection of Porsche 914 items for sale. Three GA and one GB 2.0 liter crankcases. Each has been cleaned, inspected and determined to be in very good condition and never align bored.
One 914 GA engine, missing cylinders and fuel injection system.
One 914 GA engine complete with fuel injection. Good running motor.
One 914 1.8 engine complete with fuel injection. Good running motor.
One 914 1.8 engine complete with fuel injection. Good running motor.
I have a friend who regularly ships containers to Belgium and Italy and could easily include engines and transmissions in these shipments.
Let me know if you have any interest.
Cheers,
Henry
1956 356 Coupe
1970 911T Coupe
1973 914-4 2.0 Roadster
Hankster