I know many on here use PostImage to upload images to this forum.
I have used then 100% reliably for years...
However, a few days ago their site was down for maintenance.
When is came back on a few hours later the operating 'routine' had changed. Example:
Open Post Image, Choose an image to upload to (say) DDK. Images are on my PC.
Now a large picture of the chosen image appears on the screen but NO means of selecting the mode for copy, ie formatted for image to a forum.
Now i have to right click on the large image, copy the image link, paste on and then highlight and convert to 'image' and it is all there. The simplicity of the routine previously used has gone. Have tried contacted them by their contact details but no response.
Anyone else have this issue on here at all?
Post Image: changed format problem
Moderators: hot66, Miggs, 58A - 71E, impmad2000, drummerboytom, Barry, Helen, Viv_Surby, Derek, KS, abm914, Mike Usiskin
-
- Nurse, I think I need some assistance
- Posts: 19025
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Post Image: changed format problem
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
- KS
- Nurse, I think I need some assistance
- Posts: 14997
- Joined: Fri May 07, 2004 3:12 pm
- Location: Cornwall
Re: Post Image: changed format problem
Nothing has changed for me. Just used it and exactly the same as before.
- Bootsy
- Site admin and the Boss
- Posts: 24004
- Joined: Sat Nov 08, 2003 6:09 pm
- Location: Norwich
- Contact:
Re: Post Image: changed format problem
True. I’ve just logged into one of Keith’s hidden postimage folders titled ‘Rubber and Restraint’ and all looks fine (might fine actually)
1972 911T | 1994 993 Carrera | 1999 986 Boxster | 1990 T25 Camper
Vintage Heuer, Omega, Zenith and other vintage watches - http://www.heuerheritage.co.uk
Vintage Heuer, Omega, Zenith and other vintage watches - http://www.heuerheritage.co.uk
-
- Nurse, I think I need some assistance
- Posts: 19025
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Re: Post Image: changed format problem
Ha! typical it would happen to me.
At least I know it is working as before, just why it has changed for me I'll never know, it might change back...
At least I know it is working as before, just why it has changed for me I'll never know, it might change back...
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
-
- Nurse, I think I need some assistance
- Posts: 19025
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Re: Post Image: changed format problem
Fixed it !!!!!!
Reset my password via their system and logged in. Everything now back to normal. HOW on earth did I think of that?
Picture test
Reset my password via their system and logged in. Everything now back to normal. HOW on earth did I think of that?
Picture test
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9