Any idea where I can get one of these????

alfietom · Post by **alfietom** » Thu Sep 19, 2019 2:43 pm

My Roller on my carb linkage hasn't been rolling causing a flat worn groove. This results in the throttle not always returning all the way back giving a fluctuating tick over.

The Part Number is: 911 1009 2100 ....Need one new or used.....just not grooved,

[url=https://flic.kr/p/2hhGmi3][img]htt ... .jpg[/img]IMG_3927 by [url=https://www.flickr.com/photos/159958086@N07/]

cschmueck · Post by **cschmueck** » Wed Sep 25, 2019 1:41 pm

Hi Tom,

I used a small bearing:

https://simplybearings.co.uk/shop/advan ... rds=696ZZ+

Alternatively Rocky SRL in Italy will sell you the actuator assembly:

https://www.ebay.com/itm/ZENITH-40-TIN- ... SwGhxbu4sj

BTW that guy has everything- even if it is not listed.

Regards,
Christian

alfietom · Post by **alfietom** » Wed Sep 25, 2019 2:10 pm

Hi Christian,
Thanks for that.....I've just ordered a pair. I had effected a repair using Model Bearings but the diameter of the bearing was considerably narrower so i thought its better to have the real deal.
Thanks again
Simon

Trevi1 · Post by **Trevi1** » Thu Sep 14, 2023 11:39 am

Hello! I am looking for that spring!!

Thanks!

Sent from my iPhone using Tapatalk

DDK - Die Deutschen Klassiker

Any idea where I can get one of these????

Any idea where I can get one of these????

Re: Any idea where I can get one of these????

Re: Any idea where I can get one of these????

Re: Any idea where I can get one of these????